vp-scientific VP 530

带有控制井的试剂池

试剂容器的死体积和大体积。
亲水涂层铝水库
PEEK水库
PTFE水库

右图显示了我们在Apricot Designs TPS-384机器人上使用的各种试剂储存器。

  保存试剂

VP 530

当吸取宝贵的试剂时，减少水库中的废物或死体积是一个重要的优势。我们使用可高温高压灭菌的聚丙烯可重复使用的容器（VP 530），通过在9 mm中心的底部加工凹痕来符合96孔样式。该储存器符合SBS标准尺寸，长127.7毫米，宽85.5毫米，深25.4毫米，高32毫米。水库总容量为200毫升。聚丙烯的一个显着优点是它对大多数有机溶剂的耐受性。有关耐溶剂性的完整列表，请 点击此链接。  对于聚丙烯和其他常用塑料的耐化学性能，请点击此链接。

除了这些可重复使用的水库外，我们还 为那些偏爱一次性便利的人们提供 一次性聚丙烯水库。一次性使用和可重复使用的浅坑储层之间的差异之一是储层的高度。这可能是一个问题，取决于移液器吸头的长度和机器人的清除问题。

试剂仓的死体积和大体积。

  
  技术文件：
    尺寸的CAD图纸
 

  控制井

VP 530A

我们加工的聚丙烯试剂储存器的一个重要的优点是我们可以将对照孔加工成储库，因此您可以拥有多种不同的对照试剂。控制井可以定制应用于油藏的任何部分。右边的VP 530A油藏有8个独立的控制井。中心控制井每个容量为2.5毫升。顶部和底部对照孔每个容量为3.0ml。主水库有175毫升试剂的容量。请注意，除普通试剂容器外，对照孔还具有凹坑以减少死体积损失。

  
  技术文件：
    尺寸的CAD图纸
 

VP 530B

右侧 的VP 530B储液罐具有一个主容量为175 ml的试剂容器和一个可容纳20 ml的单塔控制容器。同样，这两个部分都有凹坑以减少死体积损失。试剂池符合SBS标准尺寸，长127.7 mm，宽85.5 mm，深25.4 mm，高32 mm。水库由耐溶剂，耐高压的聚丙烯构成。 试剂仓的死体积和大体积。
 

VP 530C

右侧 的VP 530C大试剂容器设计用于在容器底部保留小容量的珍贵试剂。使用标准贝克曼板架和长的Beckman移液吸头（储液池深度= 37 mm），该储液罐也可以安装在Beckman FX机器人的甲板上。为了增加容量（700毫升）和底部的底切，我们在容器顶部设置了“过大”的容器，以便它适合FX上的标准127.7毫米×85.5毫米SBS脚印板支架。在右边的照片上看到底切（箭头）。外侧尺寸为190.3毫米乘115.3毫米和54.3毫米高。

所有的水库都可以根据控制井或入口和出口连接器进行定制。右侧的VP 530C采用快速断开接头进行定制，当断开连接时可进行密封。入口位于储层壁和储层底部的出口处，以便更换储层液体。

试剂仓的死体积和大体积。

  
  技术文件：
    尺寸的CAD图纸
 

VP 530C-B和VP 530C-BL

的VP 530C-B储液器和VP 530 Ç -BL盖是一个大体积试剂储存系统，该系统 具有一个超大储存室和一个适合于机器人甲板瓷砖或ALPS的SBS尺寸“脚”。该系统  设计用于容纳大量的光敏试剂。储液器和盖子均由黑色聚丙烯制成，可容纳700ml试剂。这个水库可以高压灭菌。  

水库深度为  37 毫米，总体规格为：
190.3毫米乘115.3毫米和54.3毫米高。

所述 VP530C-BL盖具有96个孔（7 通过顶部钻孔以允许移液管到不去除盖子提取试剂毫米直径）。盖子在内侧被底切以将盖子定位在储存器上而不重叠。尽管初设计适合Beckman FX ALP，但它也与其他许多机器人平台兼容。盖子也由黑色聚丙烯制成，可以高压灭菌。

右边的照片显示了底部的SBS足迹打印功能。

右边的照片显示了机器人甲板上的储存器，并显示了移液器吸头从盖子上的孔中下来。

我们还制作了一个相同的水箱和黑色Delrin的盖子，它更便宜但不能高压灭菌。

的VP 530C1-B 储液器和VP 530C1-BL盖是一个大体积试剂储存系统，其具有过大的储存室和一个适合于机器人甲板瓷砖或ALPS的SBS尺寸“脚”。该系统设计用于容纳大量的光敏试剂。储液器和盖子均由黑色Delrin制成，可容纳700ml试剂。这个水箱和盖子不能高压灭菌。

水库深度为37毫米，总规格为190.3毫米乘115.3毫米和54.3毫米高。

的VP 530 C1 -BL是用于盖VP 530C 1-B具有96个孔直径7mm穿过顶部钻孔。

VP 530D

右侧 的VP 530D储存器具有较厚的壁（7毫米和10毫米厚），因此壁面正好向下到凹痕处，因此留下较少的空间用于试剂混合并失去体积。该容器的容量为170毫升试剂，死体积为2.4毫升。此板再次凹陷以减少死体积损失。试剂池的外部符合长127.7毫米×宽85.5毫米的SBS标准尺寸，深度为40毫米，高48毫米。水库由耐溶剂，耐高压的聚丙烯构成。 

右边的照片显示了一个用outl et连接器定制的VP 530D 。  出口连接器设有一个该密封快速脱开设备小号 断开时。

  
  技术文件：
    尺寸的CAD图纸
 

  
  384凹窝底水库

VP 531

当吸取宝贵的试剂时，减少水库中的废物或死体积是一个重要的优势。我们使用可高压灭菌的聚丙烯可重复使用的储存器，通过在4.5毫米中心的底部加工凹痕以符合384孔样式，实现了这一目标。的VP 531贮存符合的长85.5毫米宽127.7毫米SBS标准尺寸，并用25.4毫米深腔，并随时32毫米高。水库总容量为200毫升。

的右图显示了一个VP 531 定制与入口和OUTL等连接器小号。

  
  技术文件：
    尺寸的CAD图纸
 

VP 531A

当用96或384孔移液头将试剂吸移到测定板中时，在单独的隔室中使用多种对照试剂通常是有用的。困难在于使分隔壁足够薄并且不会干扰移液器吸头。我们已经制造了几个这样的具有非常薄的壁（1.38mm厚）的储存器，因此移液管可以到达储存器的底部。这个尺寸允许移液器距25.4mm时的直径大到3.12mm。在距离的距离处，大多数384移液器的直径仅为2.5mm。

我们还在容器的底部“凹陷”，因此可以使用昂贵的试剂的后残渣。 

试剂仓的死体积和大体积。

右图显示了后几毫升的珍贵红色试剂将聚集在VP 531A的凹坑中。

如果在聚丙烯和聚四氟乙烯储罐的控制井之间有薄壁分隔器，我们不建议对储层进行自动化处理以防止变形薄壁的变形。
**对于需要高压灭菌的应用，我们还提供铝制储罐 。

  
  技术文件：
    尺寸的CAD图纸
 

VP 531B

的 VP 531B试剂贮存符合长85.5毫米宽的127.7毫米SBS标准尺寸，并用25.4毫米深腔，并随时32毫米高。水库总容量为200毫升。中心控制井每个容量为2.5毫升。顶部和底部对照孔每个容量为3.0ml。水库由耐溶剂聚丙烯构成。 

分隔墙的宽度为1.3毫米。检查您的移液器分离，看它是否可以适应壁厚。

如果在聚丙烯和聚四氟乙烯储罐的控制井之间有薄壁分隔器，我们不建议对储层进行自动化处理以防止变形薄壁的变形。
**对于需要高压灭菌的应用，我们还提供铝制储罐 。

  
  技术文件：
    尺寸的CAD图纸
 

VP 531C

的 VP 531C是试剂贮存其中两个柱1和2与列23＆24被用来制造16个控制贮存器。试剂池符合SBS标准尺寸，长127.7 mm，宽85.5 mm，深25.4 mm，高32 mm。水库由耐溶剂聚丙烯构成。 
 

分隔墙的宽度为1.3毫米。检查您的移液器分离，看它是否可以适应壁厚。

试剂仓的死体积和大体积。

  
  技术文件：
    尺寸的CAD图纸
 

VP 531D

的 VP 531D是试剂贮存其中两个柱1和2和列3和4被用于制作16个控制贮存器。请注意，由于第3栏和第4栏中控制井的位置，它们只能保持1.4毫升。试剂池符合SBS标准尺寸，长127.7 mm，宽85.5 mm，深25.4 mm，高32 mm。储层构造耐溶剂的P聚环氧。 试剂仓的死体积和大体积。
 

如果在聚丙烯和聚四氟乙烯储罐的控制井之间有薄壁分隔器，我们不建议对储层进行自动化处理以防止变形薄壁的变形。
**对于需要高压灭菌的应用，我们还提供铝制储罐 。

  
  技术文件：
    尺寸的CAD图纸
 

VP 531E-PTFE

的VP 531E-PTFE是384风格试剂贮存用4个段每个保持45毫升和内的位置处的那些段在G1，G2，H1，H2和I1，I2，J1，J2定位控制微型室在边缘和G13，G14，H13，H14和I13，I14，J13 J14在每个控制室中具有4个凹坑凹陷。对照孔每个保持1.4ml。尽管在右边的照片中看不到，但水库底部呈384形式凹陷。我们还在容器的底部“凹陷”，因此可以使用昂贵的试剂的后残渣。 

试剂池符合SBS标准尺寸，长127.7 mm，宽85.5 mm，深25.4 mm，高32 mm。储罐由耐溶剂PTFE构成。 

试剂仓的死体积和大体积。

分隔墙的宽度为1.3毫米。检查您的移液器分离，看它是否可以适应壁厚。

如果在聚丙烯和聚四氟乙烯储罐的控制井之间有薄壁分隔器，我们不建议对储层进行自动化处理以防止变形薄壁的变形。
**对于需要高压灭菌的应用，我们还提供铝制储罐 。

VP 531F-PTFE

的VP 531F-PTFE是VP 531E-PTFE 384风格试剂贮存的变化，而不段，但是与在G1，G2，H1，H2和I1，I2，J1，J2相同的控制微型室在边缘和G13， G14，H13，H14和I13，I14，J13 J14在每个控制室中有4个凹坑凹陷。对照井每个容纳1.4毫升，并且一个容纳185毫升的大凹窝底部分。我们还在容器的底部“凹陷”，因此可以使用昂贵的试剂的后残渣。 

试剂池符合SBS标准尺寸，长127.7 mm，宽85.5 mm，深25.4 mm，高32 mm。储罐由耐溶剂PTFE构成。 

分隔墙的宽度为1.3毫米。检查您的移液器分离，看它是否可以适应壁厚。

如果在聚丙烯和聚四氟乙烯储罐的控制井之间有薄壁分隔器，我们不建议对储层进行自动化处理以防止变形薄壁的变形。
**对于需要高压灭菌的应用，我们还提供铝制储罐 。

VP 531G-PTFE

的VP 531G-PTFE是具有4个片段，但没有控制微型室的VP 531E-PTFE 384风格试剂贮存的变型。每个分段腔室呈384形式凹陷并容纳86.5ml。我们还在容器的底部“凹陷”，因此可以使用昂贵的试剂的后残渣。 

试剂池符合SBS标准尺寸，长127.7 mm，宽85.5 mm，深25.4 mm，高32 mm。储罐由耐溶剂PTFE构成。 

分隔墙的宽度为1.3毫米。检查您的移液器分离，看它是否可以适应壁厚。

这种储存器也可用于疏脂涂层铝和更薄的分隔壁以适应更宽的移液器。请参阅VP 531G-AL。

右图显示了Apricot Designs TPS-384机器人使用的VP 531G-PTFE。

如果在聚丙烯和聚四氟乙烯储罐的控制井之间有薄壁分隔器，我们不建议对储层进行自动化处理以防止变形薄壁的变形。
**对于需要高压灭菌的应用，我们还提供铝制储罐 。

VP 531J

右边 的VP 531J水库设有一个主容量为175 ml的试剂容器和一个可容纳20 ml的双塔控制容器。同样，这两个部分都有凹坑以减少死体积损失。试剂池符合SBS标准尺寸，长127.7 mm，宽85.5 mm，深25.4 mm，高32 mm。水库由耐溶剂聚丙烯构成。 

分隔墙的宽度为1.3毫米。检查您的移液器分离，看它是否可以适应壁厚。

如果在聚丙烯和聚四氟乙烯储罐的控制井之间有薄壁分隔器，我们不建议对储层进行自动化处理以防止变形薄壁的变形。
**对于需要高压灭菌的应用，我们还提供铝制储罐 。

 
VP 531J1

右边 的VP 531J1油箱配有一个容量为185毫升试剂的主油箱和一个可容纳10毫升的双塔控制油箱。同样，这两个部分都有凹坑以减少死体积损失。试剂池符合SBS标准尺寸，长127.7 mm，宽85.5 mm，深25.4 mm，高32 mm。水库由耐溶剂聚丙烯构成。 

分隔墙宽1.3毫米。检查您的移液器分离，看它是否可以适应壁厚。

如果在聚丙烯和聚四氟乙烯储罐的控制井之间有薄壁分隔器，我们不建议对储层进行自动化处理以防止变形薄壁的变形。
**对于需要高压灭菌的应用，我们还提供铝制储罐 。

VP 531K

的VP 531K是384风格试剂贮存4个大型（96位）部分，每个部分保持40毫升和额外的16小时（4位）片段或对照孔中。对照孔每个保持1.4ml。我们已经“水坑”了水库的底部，因此可以使用昂贵试剂的后一根渣滓。 

试剂池符合SBS标准尺寸，长127.7 mm，宽85.5 mm，深25.4 mm，高32 mm。水库由耐溶剂聚丙烯构成。

试剂仓的死体积和大体积。

如果在聚丙烯和聚四氟乙烯储罐的控制井之间有薄壁分隔器，我们不建议对储层进行自动化处理以防止变形薄壁的变形。
**对于需要高压灭菌的应用，我们还提供铝制储罐 。

VP 531L

右侧 的VP 531L大试剂容器设计用于在容器底部保留少量的贵重试剂，同时保留少的废物。使用标准贝克曼板架和长贝克曼移液器吸头（储存器深度= 23.8毫米），该储存器也被设计成适合贝克曼FX机器人的甲板。为了增加容量（450毫升），我们在容器顶部设置了“超大尺寸”的容器，并将底部切入底部，以适应FX上的标准127.7毫米×85.5毫米SBS脚印板支架。在右边的照片上看到底切（箭头）。外侧尺寸为190毫米乘115毫米和40.8毫米高。VP 531L水池底部的384个凹坑用于以小死体积回收大量的试剂。

VP 531M

的VP 531M是384风格试剂贮存在柱1和柱13 2个小一列宽的对照孔，并通过在12 2列对照孔的2个较大部分和14至24的较大的部分，每个部分保持90毫升和两个单每列5毫升。我们已经“水坑”了水库的底部，因此可以使用昂贵试剂的后一根渣滓。 

试剂池符合SBS标准尺寸，长127.7 mm，宽85.5 mm，深25.4 mm，高32 mm。水库由耐溶剂聚丙烯构成。

这两大部分是（1）AP 2-13和（2）AP 14-24。两个狭窄的部分是（3）AP 1和（4）AP 13.分隔墙宽1.3毫米。检查您的移液器分离，看它是否可以适应壁厚。

这种储存器也可用于疏脂涂层铝和更薄的分隔壁以适应更宽的移液器。见VP 531M-AL。

如果在聚丙烯和聚四氟乙烯储罐的控制井之间有薄壁分隔器，我们不建议对储层进行自动化处理以防止变形薄壁的变形。
**对于需要高压灭菌的应用，我们还提供铝制储罐 。

VP 531N

的VP 531N 是384风格试剂贮存在1列中的两个小两列宽的对照孔和2以及在列23的三个小两个宽对照孔和24，并在储存器的中间列中3至22单个大的控制部大部分容积为160毫升，16个液泡对照孔容量为8毫升，10个液泡对照孔容纳5.5毫升，12个液泡对照孔容纳6毫升，8个液泡对照孔容纳4毫升。 我们已经“水坑”了水库的底部，因此可以使用昂贵试剂的后一根渣滓。 

试剂池符合SBS标准尺寸，长127.7 mm，宽85.5 mm，深25.4 mm，高32 mm。水库由耐溶剂聚丙烯构成。

分隔墙的宽度为1.3毫米。检查您的移液器分离，看它是否可以适应壁厚。

如果在聚丙烯和聚四氟乙烯储罐的控制井之间有薄壁分隔器，我们不建议对储层进行自动化处理以防止变形薄壁的变形。
**对于需要高压灭菌的应用，我们还提供铝制储罐 。

VP 531N-1

的VP 531N-1是384风格试剂贮存在列23小两个柱宽对照孔和24从一行到我P列24和储存器的中间的单个大的主区段。大部分容纳180毫升，16个酒窝控制井容纳8毫升。我们已经“水坑”了水库的底部，因此可以使用昂贵试剂的后一根渣滓。 

试剂池符合SBS标准尺寸，长127.7 mm，宽85.5 mm，深25.4 mm，高32 mm。水库由耐溶剂聚丙烯构成。

分隔墙的宽度为1.3毫米。检查您的移液器分离，看它是否可以适应壁厚。

如果在聚丙烯和聚四氟乙烯储罐的控制井之间有薄壁分隔器，我们不建议对储层进行自动化处理以防止变形薄壁的变形。
**对于需要高压灭菌的应用，我们还提供 铝制储罐。

VP 531N-2

的VP 531N-2是384风格试剂贮存在1列三个小两个列宽对照孔和2（二对照孔覆盖的10个位置和一个控制孔（中心）覆盖12个位置。另一系列对照孔是在储罐右侧和盖4分别位于第23和24列中，并且在储罐中部的第3至22列中有单个大控制部分。大部分容纳160ml，10个位置对照孔容纳5ml，12位置控制井保持6毫升，位置控制井保持2毫升  ，与VP 531N油藏不同，我们没有使该油藏的底部“凹陷”。

试剂池符合SBS标准尺寸，长127.7 mm，宽85.5 mm，深25.4 mm，高32 mm。水库由耐溶剂聚丙烯构成。

分隔墙的宽度为1.3毫米。检查您的移液器分离，看它是否可以适应壁厚。

如果在聚丙烯和聚四氟乙烯储罐的控制井之间有薄壁分隔器，我们不建议对储层进行自动化处理以防止变形薄壁的变形。
**对于需要高压灭菌的应用，我们还提供 铝制储罐。

  
  技术文件：
    尺寸的CAD图纸
 

VP 531P-PEEK

的VP 531P-PEEK 是384风格试剂贮存在所有列24个小一列宽的对照孔。每根柱子都有一个“U”形底部和19毫米深的分隔壁，厚度为0.75毫米。储存器尺寸长127.5毫米，高85.5毫米，高32毫米，由可高压加热的PEEK制成。 

分隔墙宽0.75毫米。检查您的移液器分离，看它是否可以适应壁厚。

VP 531-X1

384风格p聚环氧贮存用5个室宽3列和第6小1列宽。

  ***新***
  亲水涂层铝试剂容器

这些储存器上的亲水涂层大限度地提高了它们所用试剂的回收率。亲水涂层可防止液滴形成并使试剂聚集在凹坑区域。我们还通过将这些壁带入凹窝区域，然后将该边角倒圆角以防止角落中的液体流失，促进在凹窝中收集试剂。上述的聚丙烯，Delrin和PTFE储库都是疏水性的，在平坦区域和角落留下试剂液滴，因此具有较大的“死体积”。 

带控制井的铝质储层的另一个优点是，我们可以用铝制造分隔壁比使用厚度为0.7毫米而厚度为1.3毫米的塑料（聚丙烯，Delrin和PTFE）更薄，从而消除了某些品牌吸管悬挂的潜在问题当它们靠近储存器的底部时在分隔壁上向上。

亲水涂层铝储存器的第三个优点是气泡不会陷入底部的凹坑中。只需倒入少量试剂，旋动，凹陷处充满液体，空气不会陷入凹陷处。聚丙烯，聚甲醛树脂和聚四氟乙烯的情况并非如此，必须去除凹窝中的空气（通过移液管吸头移除）或离心。

我们ħ ydrophilic涂层不会受到30％H 2 O 2，盐，hydrofluoric acid,除外的所有酸，所有碱基，所有极性和非极性溶剂，和钾ferrocy 一个德纳。它也可以高压灭菌和化学灭菌。

VP 530-AL

的 VP 530-AL是用亲水性涂覆的铝制成的96试剂槽。直径8毫米的凹陷凹陷，圆角内侧凹陷。

该试剂储存器符合SBS标准尺寸127.​​7毫米长85.5毫米宽，并具有40毫米深的腔体，并站立48毫米高。

  
  技术文件：
    尺寸的CAD图纸
 

VP 530D-AL

亲水性涂层铝试剂储存器符合SBS标准尺寸，长127.7 mm，宽85.5 mm，深24 mm，高32 mm，凹坑直径3.3 mm，比我们典型的96凹坑储层小 - 见VP 530 -AL。由于凹坑的尺寸较小，因此设计用于大容量或非常小容量的储液罐。

VP 530F-AL

亲水涂层铝试剂储存器符合SBS标准尺寸127.​​7毫米长85.5毫米宽，并具有40毫米深的腔体，并且站立51毫米高。水库底部没有凹坑。

VP 530-FP-AL

亲水涂层铝试剂储存器符合标准的外部SBS尺寸，长127.7mm，宽85.5mm，深40mm，高51mm。水库底部没有凹坑。上唇被切掉以适应标准微孔板盖。内部尺寸与Nalge Nunc水箱相同（长121.8毫米，宽79.3毫米）。底部切入11个珀尔帖传热槽。用于聚碳酸酯泡沫桨架系统（VP 750-ECON-6）。

VP 530D-4AL

亲水涂层铝储罐127.7毫米长，85.5毫米宽，19毫米深的空腔和整体站立32毫米高。96个凹陷凹陷。包含4个大房间（第1-3,4-6,7-9,10-12列）。

VP 531-AL

的VP 531-AL是用亲水性涂覆的铝制成的384试剂贮存。直径为3.3毫米的凹陷凹陷，圆角内侧凹陷。

试剂池符合SBS标准尺寸，长127.7 mm，宽85.5 mm，深25 mm，高32 mm。

VP 531-ALL

的 VP 531-ALL 是用亲水性涂覆的铝制成的低轮廓384试剂贮存。直径为3.3毫米的凹陷凹陷，圆角内侧凹陷。

试剂储存器符合SBS标准尺寸127.​​7毫米长85.5毫米宽和11.5毫米深的腔体，并站立15毫米高。

亲水涂层防止气泡被困在凹坑中。

VP 531-ALL-1

低外形384试剂储存器由亲水涂层铝制成。1.2毫米直径的凹陷凹陷，以容纳10微升。试剂储存器符合SBS标准尺寸127.​​7毫米长85.5毫米宽和11.5毫米深的腔体，并站立15毫米高。

VP 534-ALL

采用亲水涂层铝制成的小型384 V槽试剂储液器。储器底部的内置凹槽减少了试剂的浪费，并可以一次性吸取少量的试剂。凹槽上的亲水涂层可以使液体均匀分散，并且底部初需要的起始试剂量少。试剂储存器符合SBS标准尺寸，长127.7 mm，宽85.5 mm，深13.5 mm，高15 mm。

VP 531C-ALL-OPEN

所述VP531C-ALL-OPEN是有三个例外的VP 531C的变型中，中心区域不具有底部并保持无试剂，它是由具有亲水涂层的铝和16个控制孔的底部没有酒窝。   

使用这个容器，您只需将对照试剂添加到分析板上即可。

涂层铝的优点是可以使隔壁比任何塑料（1.3毫米）都更薄（0.7毫米）。此功能对于更宽的移液管吸头很重要，因为当吸头位于储液池底部时，宽的吸液管没有足够的间隙跨过 塑料分隔壁。

VP 531G-AL

的VP 531G-AL是从亲水性涂铝制成4段中的VP 531G-PTFE 384风格试剂贮存的变型。每个分段的腔室以384种模式呈微凹，并容纳60毫升。我们还在容器的底部“凹陷”，因此可以使用昂贵的试剂的后残渣。 

试剂容器符合SBS标准尺寸127.​​7毫米长，85.5毫米宽，19毫米深的腔体，高32毫米。涂层铝的优点是可以使隔壁比任何塑料（1.3毫米）都更薄（0.7毫米）。此功能对于更宽的移液管吸头很重要，因为当吸头位于储液池底部时，宽的吸液管没有足够的间隙跨过 塑料分隔壁。

第二个优点是亲水性涂层，可防止液滴形成并使试剂聚集在凹坑区域。我们还通过将这些壁带入凹窝区域，然后将该边角倒圆角以防止角落中的液体流失，促进在凹窝中收集试剂。

亲水涂层防止气泡被困在凹坑中。

VP 531J1-AL

右侧 的VP 531J1-AL储液罐具有一个主容量为185毫升的试剂容器和一个可容纳10毫升的双塔控制容器。同样，这两个部分都有凹坑以减少死体积损失。

试剂池符合SBS标准尺寸，长127.7 mm，宽85.5 mm，深25.4 mm，高32 mm。水库由亲水涂层铝构成。分隔墙宽0.7毫米。

VP 531M-AL

的VP 531M-AL是从亲水性涂铝制成4段中的VP 531M 384风格试剂贮存的变型。这两大部分是（1）AP 2-13和（2）AP 14-24。两个狭窄的部分是，（3）AP 1和（4）AP 13.每个大的分割腔体呈384形式凹陷并容纳70ml。每个小分割室都有384个模式，并容纳4.5毫升。我们还在容器的底部“凹陷”，因此可以使用昂贵的试剂的后残渣。 

试剂容器符合SBS标准尺寸127.​​7毫米长，85.5毫米宽，19毫米深的腔体，高32毫米。涂层铝的优点是可以使隔壁比任何塑料（1.3毫米）都更薄（0.7毫米）。此功能对于较宽的移液吸头很重要，因为较宽的移液吸头没有足够的间隙跨过 塑料分隔壁。

第二个优点是亲水性涂层，可防止液滴形成并使试剂聚集在凹坑区域。我们还通过将这些壁带入凹窝区域，然后将该边角倒圆角以防止角落中的液体流失，促进在凹窝中收集试剂。

亲水涂层防止气泡被困在凹坑中。

VP 531O-ALL

的VP 531O-ALL是从亲水性涂铝制成3段中的VP 531M-AL 384风格试剂贮存器的低轮廓的变化。两个小对照部分是第1列和第2列，每个都能容纳约2.5ml的试剂。大部分包含剩余的22列，并且将容纳85ml的试剂。大腔室在4.5毫米的中心上有352个3.3毫米直径的凹痕。我们已经“水坑”了水库的底部，因此可以使用昂贵试剂的后一根渣滓。 

试剂池的外部尺寸符合SBS标准尺寸，长127.7毫米，宽85.5毫米，深12.5毫米，高15毫米。涂层铝的优点是可以使隔壁比任何塑料（1.3毫米）都更薄（0.7毫米）。此功能对于较宽的移液吸头很重要，因为较宽的移液吸头没有足够的间隙跨过 塑料分隔壁。

第二个优点是亲水性涂层，可防止液滴形成并使试剂聚集在凹坑区域。我们还通过将这些壁带入凹窝区域，然后将该边角倒圆角以防止角落中的液体流失，促进在凹窝中收集试剂。

亲水涂层防止气泡被困在凹坑中。

VP 531Q-1AL

的VP 531Q-1AL是384风格试剂贮存从亲水性涂铝制成八个小控制部分。个控制部分从A1到H1，第二个从I1到P1，第三个从B2到H2，第四个从I2到P2，控制很好，从A3到P22，第六个是从A23到H23，第七个从I23到P23，八个从A24到H24，第九个从I24到P24。每个部分的底部以384图案凹陷。主室容纳 - 毫升。每个控制室都有384个模式的凹坑，并保持 - 毫升。通过将储存器的底部加以点缀，可以使用昂贵试剂的后一个渣滓。 

试剂容器符合SBS标准尺寸127.​​7毫米长，85.5毫米宽，19毫米深的腔体，高32毫米。涂层铝的优点是可以使隔壁比任何塑料（1.3毫米）都更薄（0.7毫米）。此功能对于较宽的移液吸头很重要，因为较宽的移液吸头没有足够的间隙跨过 塑料分隔壁。

第二个优点是亲水性涂层，可防止液滴形成并使试剂聚集在凹坑区域。我们还通过将这些壁带入凹窝区域，然后将该边角倒圆角以防止角落中的液体流失，促进在凹窝中收集试剂。

第三个优点是亲水涂层可以防止气泡被困在凹坑中。

VP 531Q-2AL

的VP 531Q-2AL是384风格试剂贮存从亲水性涂铝制成四个小控制部分。个控制区段从A1到P1，第二个控制区段从B2到P2，从A3到P22有一个很大的控制井，第四个从A23到P23，第五个从A24到P24。每个部分的底部以384图案凹陷。主室容纳 - 毫升。每个控制室都有384个模式的凹坑，并保持 - 毫升。通过将储存器的底部加以点缀，可以使用昂贵试剂的后一个渣滓。 

试剂容器符合SBS标准尺寸127.​​7毫米长，85.5毫米宽，19毫米深的腔体，高32毫米。涂层铝的优点是可以使隔壁比任何塑料（1.3毫米）都更薄（0.7毫米）。此功能对于较宽的移液吸头很重要，因为较宽的移液吸头没有足够的间隙跨过 塑料分隔壁。

第二个优点是亲水性涂层可防止液滴形成并使试剂收集在凹坑区域。我们还通过将这些壁带入凹窝区域，然后将该边角倒圆角以防止角落中的液体流失，促进在凹窝中收集试剂。

第三个优点是亲水涂层可以防止气泡被困在凹坑中。

VP 531Q-3AL

的VP 531Q-3AL是384风格试剂贮存与四个小控制部分和由亲水性涂覆的铝制成2层大的部分。个控制部分从A1到P1，第二个控制部分从B2到P2，从A3到P12有一个很大的控制孔，第四个从A13到P13，第五个从A14到P14，第二个大部分是从A 15到P24。每个部分的底部以384图案凹陷。主室容纳 - 毫升。每个控制室都有384个模式的凹坑，并保持 - 毫升。通过将储存器的底部加以点缀，可以使用昂贵试剂的后一个渣滓。 

试剂容器符合SBS标准尺寸127.​​7毫米长，85.5毫米宽，19毫米深的腔体，高32毫米。涂层铝的优点是可以使隔壁比任何塑料（1.3毫米）都更薄（0.7毫米）。此功能对于较宽的移液吸头很重要，因为较宽的移液吸头没有足够的间隙跨过 塑料分隔壁。

第二个优点是亲水性涂层可防止液滴形成并使试剂收集在凹坑区域。我们还通过将这些壁带入凹窝区域，然后将该边角倒圆角以防止角落中的液体流失，促进在凹窝中收集试剂。

第三个优点是亲水涂层可以防止气泡被困在凹坑中。

VP 531Q-4AL

的VP 531Q-4AL是384风格试剂贮存有八个小控制部分和由亲水性涂覆的铝制成2层大的部分。个控制部分从A1到H1，第二个从I1到P1，第三个从B2到P11，第四个从A12到H12，第五个从I12到P12，第六个从A 13到H13，第7个从I13到P13，从A14到P23有很大的控制孔，第9个从A24到H24，第10个从I24到P24。每个部分的底部以384图案凹陷。主要的商会举行 - 毫升。每个小型控制室都以384的模式呈现，并保持 - 毫升。通过将储存器的底部加以点缀，可以使用昂贵试剂的后一个渣滓。 

试剂容器符合SBS标准尺寸127.​​7毫米长，85.5毫米宽，19毫米深的腔体，高32毫米。涂层铝的优点是可以使隔壁比任何塑料（1.3毫米）都更薄（0.7毫米）。此功能对于较宽的移液吸头很重要，因为较宽的移液吸头没有足够的间隙跨过 塑料分隔壁。

第二个优点是亲水性涂层可防止液滴形成并使试剂收集在凹坑区域。我们还通过将这些壁带入凹窝区域，然后将该边角倒圆角以防止角落中的液体流失，促进在凹窝中收集试剂。

第三个优点是亲水涂层可以防止气泡被困在凹坑中。

VP 531Q-L

的VP 531Q-L是384风格试剂贮存从亲水性涂铝制成两个大的控制部。个控制部分从A1到P12，第二个控制部分从A13到P24。每个部分的底部以384模式凹陷。主室容纳 - 毫升。每个控制室都有384个模式的凹坑，并保持 - 毫升。通过将储存器的底部加以点缀，可以使用昂贵试剂的后一个渣滓。 

试剂容器符合SBS标准尺寸127.​​7毫米长，85.5毫米宽，19毫米深的腔体，高32毫米。涂层铝的优点是可以使隔壁比任何塑料（1.3毫米）都更薄（0.7毫米）。此功能对于较宽的移液吸头很重要，因为较宽的移液吸头没有足够的间隙跨过 塑料分隔壁。

第二个优点是亲水性涂层可防止液滴形成并使试剂收集在凹坑区域。我们还通过将这些壁带入凹窝区域，然后将该边角倒圆角以防止角落中的液体流失，促进在凹窝中收集试剂。

第三个优点是亲水涂层可以防止气泡被困在凹坑中。

VP 531Q-6AL

亲水涂层铝储罐127.7毫米长，85.5毫米宽，19毫米深的空腔和整体站立32毫米高。384个凹陷的凹陷。包含4个大房间（第1-6,7-12,13-18,19-24列）。

VP 531R-1AL

的VP 531R-1AL是384风格试剂贮存从亲水性涂覆的铝由单一控制部分。控制部分从I 23到P 24 。  每个部分的底部以384图案凹陷。主室容纳 - 毫升。该控件以384模式呈现，并保持 - ml。通过将储存器的底部加以点缀，可以使用昂贵试剂的后一个渣滓。 

试剂容器符合SBS标准尺寸127.​​7毫米长，85.5毫米宽，19毫米深的腔体，高32毫米。涂层铝的优点是可以使隔壁比任何塑料（1.3毫米）都更薄（0.7毫米）。此功能对于较宽的移液器吸头很重要，因为较宽的吸头没有足够的间隙跨越分隔壁。

第二个优点是亲水性涂层可防止液滴形成并使试剂收集在凹坑区域。我们还通过将这些壁带入凹窝区域，然后将该边角倒圆角以防止角落中的液体流失，促进在凹窝中收集试剂。

第三个优点是亲水涂层可以防止气泡被困在凹坑中。

储液器的底部有对准孔，以便它可以放在 VP 744加热器/冷却器组件上，以控制试剂的温度。由于VP 744注册到机器人甲板砖，试剂池也将注册到机器人的甲板位置。

VP 531R-2AL

的VP 531R-2AL是384风格试剂贮存从亲水性涂铝制成两个控制部件。个控制部分从I 23到L 24，第二个控制部分从M 23到P 24。每个部分的底部以384图案凹陷。主室容纳 - 毫升。每个控制室都有384个模式的凹坑，并保持 - 毫升。通过将储存器的底部加以点缀，可以使用昂贵试剂的后一个渣滓。 

试剂容器符合SBS标准尺寸127.​​7毫米长，85.5毫米宽，19毫米深的腔体，高32毫米。涂层铝的优点是可以使隔壁比任何塑料（1.3毫米）都更薄（0.7毫米）。此功能对于较宽的移液吸头很重要，因为较宽的移液吸头没有足够的间隙跨过 塑料分隔壁。

第二个优点是亲水性涂层可防止液滴形成并使试剂收集在凹坑区域。我们还通过将这些壁带入凹窝区域，然后将该边角倒圆角以防止角落中的液体流失，促进在凹窝中收集试剂。

第三个优点是亲水涂层可以防止气泡被困在凹坑中。

储液器的底部有对准孔，以便它可以放在 VP 744加热器/冷却器组件上，以控制试剂的温度。由于VP 744注册到机器人甲板砖，试剂池也将注册到机器人的甲板位置。

大试剂贮存在合适的 是由亲水性涂覆的铝制成。  它被设计用于在主贮器（175ml）和16个控制室中保持大容量的珍贵试剂。   使用标准的贝克曼板架和长的贝克曼移液头（储存器深度= 23.4毫米），该储存器也被设计成适合贝克曼FX机器人的甲板上。我们在顶部使容器“过大”以增加试剂室的容纳量 （4毫升），然后将底部底切，以适应FX上的标准127.7毫米×85.5毫米SBS脚印板支架。外侧尺寸为1 61毫米乘 85.5毫米和 25.4毫米高。VP 531 S-AL的底部没有凹坑。它可以与96和384移液头一起使用。

涂层铝的优点是可以使隔壁比任何塑料（1.3毫米）都更薄（0.7毫米）。此功能对于较宽的移液吸头很重要，因为较宽的移液吸头没有足够的间隙跨过塑料 分隔壁。

VP 531T-AL

具有384个凹坑凹陷和6个对照储层的亲水涂覆铝储层。室深= 2.54厘米。分隔壁= 0.7毫米厚。

VP 531U-AL

具有平底的10mm深的亲水涂层铝试剂储器。每个房间由6毫米宽的墙隔开。  
腔室1为第1至4列和第1至16行，
腔室2为第1至4列和第17至32行，
腔室3为第5至44列和第1至32行，
腔室4为第45至48列，行1至第在图16中，
腔室5是列45至48和列17至32  
 

整体规格：
127.76mm长
65.48mm宽
15mm高

VP 532-AL

的VP 532-AL是用亲水性涂覆的铝制成的1536试剂贮存。直径为1.5毫米的凹陷凹陷，内角为圆形，可以凹陷。

试剂容器符合SBS标准尺寸，长127.7 mm，宽85.5 mm，深5 mm，高10 mm。

VP 532-ALA

的VP 532-ALA 是用亲水性涂覆的铝制成的1536试剂贮存。直径为1.5毫米的凹陷凹陷，内角为圆形，在每个边缘有凹坑和8个对照孔。

试剂容器符合SBS标准尺寸，长127.7 mm，宽85.5 mm，深5 mm，高10 mm。

VP 532-ALB

VP 532-ALB是一个1536 - 1.5毫米直径凹坑凹陷的试剂容器，由亲水涂层铝制成，蓄水池深度= 10毫米，长127.76毫米，宽85.48毫米，高15毫米，蓄水池内尺寸为74毫米x 110毫米。在第1列和第2列至第36列以及储存柱3至46和第1至36行的主体以及第1行至第36行的右侧列47和48中凹入四个相等的控制井。 。隔垫宽度= 0.5毫米。

VP 533-AL设计用于Deerac Fluidics液体处理器。我们特殊的亲水涂层具有防止液滴形成并使试剂收集在“V”底部的优点。通过保存非常珍贵的试剂，这些水库不需要很长时间就可以为自己买单。

  带波阻尼挡板的试剂池

我们带挡板的试剂储液器与机器人系统配合使用，可将储液器移至固定的移液头或Pin工具，如Apricot，Cybio，Matrix和Tomtec。挡板在抑制波浪作用方面非常有效。储存器中的液体体积可以保持在大高度，而不用担心在移动时它会溢出到板的边缘。

VP 540

的VP 540被构造autoclaveable聚丙烯的装配到SBS标准足迹127毫米长，85毫米宽和32毫米高带空腔25毫米深的尺寸。水库将容纳215毫升的试剂。水库的两侧有13个槽口，用于安装13个VP 540F波浪挡板。每个挡板由可加压加热的环氧树脂复合材料G10构成，并在底部有一个半圆形机械加工，以允许腔体之间的流体流动。必须单独订购挡板。 

这些储存器也用于我们的 清洗和污点系统清洁针工具。

VP 540L

的VP 540L构造autoclaveable聚丙烯的装配到SBS标准足迹127毫米长，85毫米宽和32毫米高带空腔25毫米深的尺寸。该容器将容纳215毫升洗涤液。该储液罐专为旋转木马机器人甲板上的应用而设计，其中甲板的旋转运动会产生波动，从而导致储罐内容物“从容器中”滑出。VP 540L在油箱的两端加工有切口，因此较长的VP 540LF挡板可平行放置，从而防止晃动。

的VP 540LF挡板使用autoclaveable环氧复合G10构成。

VP 540PCB

的VP 540PCB构造耐溶剂PTFE的装配到锡比井机器人板持有者。尺寸长140毫米，宽102.3毫米，高32毫米，深26毫米。水库将容纳200毫升的试剂。VP 540PCB油箱也能够使用标准的VP 540F挡板。当挡板就位时，它们抑制板运动时发生的波浪作用。挡板使用可高压灭菌的环氧树脂复合材料G10构造而成。

VP 542D

的VP 542D被构造autoclaveable聚丙烯的装配到SBS标准足迹127毫米长，85毫米宽和15毫米高有空腔12.5毫米深的尺寸。水库将容纳95毫升的试剂。VP 542D油箱还具有较短（12毫米高）的G 10挡板（VP 542F），可以在运动时抑制波浪作用。这些挡板接触储水器的底部，并在其中切割半个圆，以允许流体从一个部分排到另一个部分。
 

VP 542D与VP 542的不同之处在于其底部有384个凹坑，有助于减少试剂死体积。

VP 542M

的VP 542M被构造autoclaveable聚丙烯的装配到SBS标准足迹127毫米长，85毫米宽和25毫米高带腔18毫米深的尺寸。水库将容纳95毫升的试剂。  VP 542M油箱还具有9.5毫米高的G 10挡板（VP 542MF），用于抑制运动时的波浪作用。这些挡板嵌入储存器中，不要接触储存器的底部。这种设计允许移液管或针头插入储液器，并仍在储液器边缘周围提供高壁。同样通过将挡板放置在储存器底部上方，消除了在挡板和储存器底部之间的水坑中丢失珍贵试剂的可能性。VP 542M底部还有384个凹坑，有助于减少试剂的死体积。

VP 542ML

带唇口的VP 542ML黑色钻孔盖盖住VP 542M油箱。这个盖子用于保护光敏试剂。整体尺寸在边缘为132.8毫米乘90.5毫米乘5.6毫米厚。盖子的中心部分厚2.9毫米，唇厚度5.6毫米（2.7毫米嘴唇悬垂物可捕获VP 542M储液罐）。这个盖子可以自动取出，重量只有45.5克。  

右侧的照片显示VP 530-AL使用的VP 542ML。

  双室试剂容器

VP 541

的VP 541为96个移液器或用于通过将2个储在相同的足迹，以节省甲板空间96个工具双室容器。为了说明的目的，室1填充有黄色染料，室2填充有蓝色染料。双室模型由甲醛树脂构成，设计用于装入尺寸为127毫米长，85毫米宽，32毫米高的SBS标准尺寸，两个25毫米深的交叉指纹室。每个室将容纳70毫升的试剂。双室的交叉设计（在4.5毫米的中心）消除了对波浪挡板的需求。如果试剂池在甲板上移动，这很重要。水库不可高压加热。 

还有一个出口排水和填充版本的蓄水池（VP 541T）。这有利于在运行期间在工作站上填充和排出双储存器。

这种双重储液器设计也可以用作 清洗销工具中的清洗和污渍储存器。

  离心板固定器带过滤板储液器

VP 551

当今的许多核酸纯化试剂盒都使用96孔过滤器进行产品捕获，洗涤和洗脱步骤。许多这些套件还建议使用真空歧管来执行这些步骤。的VP 551被设计成通过使用离心而不是真空歧管进行过滤步骤。使用离心机不仅可以避免购买昂贵的真空装置，而且如果需要避免由于真空故障造成的交叉污染，它也是一个更好的选择。

特征

• 容纳277毫升

• 铝制，透明硬阳极氧化外套

• 专为Qiagen Minelute滤板设计

• Plate Holder适合Hermle Z300-Rotor 220.50 V06

  定制试剂池

我们制造了许多不同的定制试剂库。右边的水库是我们为一位想要一个有11排10列的紧凑型水库的客户制造的，其水库的每个小室可容纳1毫升液体，但深度不得超过10毫米。为了完成这项壮举，我们创造了一个只有6口井的宽度为10口井的互锁设计。看到两个箭头之间的井的狭窄部分。 

如果您有类似的挑战性设计或要求苛刻的要求 - 将它们发送给我们，我们很乐意解决这些问题。

VP 535

VP 535喂鸟器型试剂储器设计用于保持给定试剂的大体积。该油箱适合任何SBS足迹甲板位置。储水池的颈部可容纳多种类型和尺寸的瓶子，从250毫升到1升以上不等。birdfeeder设计可在试剂库内保持稳定的液位，并且是定制的连续试剂输送系统的替代品。

  一次性托盘

我们还为您提供一次性聚丙烯试剂托盘。我们的一些一次性试剂托盘较高，有些比我们的可重复使用的储存器短。在清理问题很重要的情况下，可能会有其他优势。

货号

品名

品牌

VP 531Q-L

Hydrophilic Coated Aluminum Reservoir 127.7mm Long 85.5mm Wide With 19mm Deep Cavity And Stands 32mm Tall Overall. Contains 2 Large Chambers. Price/Each

vp-scientific

VP 531Q-6AL

Hydrophilic Coated Aluminum Reservoir 127.7mm Long 85.5mm Wide With 19mm Deep Cavity And Stands 32mm Tall Overall. Contains 4 Chambers (Columns 1-6, 7-12, 13-18, 19-24) with 384 dimpled bottom pattern. Price/Each

vp-scientific

VP 531R-1AL

HYDROPHILIC COATED ALUMINUM RESERVOIR 127.7mm LONG 85.5mm WIDE WITH 19mm DEEP CAVITY AND STANDS 32mm TALL OVERALL, 3.2mm DIMPLED PATTERN IN BOTTOM ON 4.5mm CENTERS, CONTROL COMPARTMENT IN I23 TO P24 WITH 0.7mm THICK DIVIDING WALL. ALSO 2 LOCATING HOLES IN

vp-scientific

VP 531R-2AL

HYDROPHILIC ALUMINUM RESERVOIR 127.7mm LONG 85.5mm WIDE WITH 19mm DEEP CAVITY AND STANDS 32mm TALL OVERALL, 3.2mm DIMPLED PATTERN IN BOTTOM ON 4.5mm CENTERS, CONTROL COMPARTMENTS IN I23 TO L24 AND M23 TO P24 WITH 0.7mm THICK DIVIDING WALLS WITH 2 LOCATING

vp-scientific

VP 531S-AL

REAGENT RESERVOIR WITH 1 LARGE CENTRAL 20 WELL WIDE SECTION IN COLUMNS 3-22, AND ROWS A-P AND 8 CONTROL SECTIONS ON EACH SIDE IN COLUMNS 1-2, AND 23-24 ROWS AB, CD, EF, GH, IJ, KL, MN, OP. CHAMBER DEPTH - 23.4 mm, DIVIDING WALL THICKNESS = 0.70 MM, BOTTOM

vp-scientific

VP 531T-AL

Hydrophilic Coated Aluminum Reagent Reservoir With 384 Dimpled Depressions And 6 Control Chambers. Chamber Depth = 2.54 Cm. Dividing Walls = 0.7 Mm Thick. Price Each.

vp-scientific

VP 531U-AL

Hydrophilic Coated Aluminum Reagent Reservoir 10 mm Deep With A Flat Bottom With 5 Chambers Each Separated By A 6 mm Wide Wall. Overall Height Of The Reservoir Is 15 mm By 127.76 mm Long And 85.48 mm Wide. Price Each.

vp-scientific

VP 532-AL

REAGENT RESERVOIR WITH 1536 - 1.5mm DIAMETER DIMPLED DEPRESSIONS, MADE WITH HYDROPHILIC COATED ALUMINUM, RESERVOIR DEPTH = 5mm, 127.76mm LONG, 85.48mm WIDE, 10mm TALL, THICK WALLS, ROUNDED INSIDE CORNERS TO DIMPLES

vp-scientific

VP 532-ALA

REAGENT RESERVOIR WITH 1536 - 1.5mm DIAMETER DIMPLED DEPRESSIONS, MADE WITH HYDROPHILIC COATED ALUMINUM, RESERVOIR DEPTH = 5mm, 127.76mm LONG, 85.48mm WIDE, 10mm TALL, THICK WALLS, ROUNDED INSIDE CORNERS TO DIMPLES, 8 CONTROL WELLS AT EACH EDGE

vp-scientific

VP 532-ALB

VP 532-ALB REAGENT RESERVOIR WITH 1536 - 1.5mm DIAMETER DIMPLED DEPRESSIONS, MADE WITH HYDROPHILIC COATED ALUMINUM, RESERVOIR DEPTH = 10mm, 127.76mm LONG, 85.48mm WIDE, 15mm TALL, THICK WALLS, ROUNDED INSIDE CORNERS TO DIMPLES, 4 CONTROL WELL IN COLUMNS 1

vp-scientific

VP 533-AL

DEERAC FLUIDICS REAGENT RESERVOIR, MADE WITH HYDROPHILIC COATED ALUMINUM, EACH

vp-scientific

VP 534-ALL

V groove reagent reservoir conforms to SBS standard dimensions of 127.7 mm long 85.5 mm wide and with a 13.5 mm deep cavity and stands 15 mm tall.

vp-scientific

VP 535

Bird feeder style refilling reagent reservoir conforms to SBS standard dimensions and can be used with different bottle types and sizes.

vp-scientific

VP 540-1

SINGLE POLYPROPYLENE WASH RESERVOIR WITH SLOTS FOR 11 BAFFLES, 127.76mm LONG, 85.48mm WIDE, 32mm TALL, 23mm DEEP, X WALL THICKNESS 7.1 MM, Y WALL THICKNESS 10.3mm, GUIDE PINS PROTRUDE 1.5mm, EACH

vp-scientific

VP 540A

BLOTTING MEDIA SUPPORT FOR VP 540 WITH 96 HOLES

vp-scientific

VP 540A2

SUPPORT STRUCTURE FOR VP 540AC ON STIR STIX REMOVER

vp-scientific

VP 540AC

96 HOLE LINT FREE BLOTTING MEDIA, 10/PKG, FITS ON VP 540A SUPPORT

vp-scientific

VP 540B1

384 Hole Blotting Media Support With Alignment Holes For 384 Fountain Reservoir (VP 546) Constructed From 0.031" Thick G10

vp-scientific

VP 540B2

384 Hole Blotting Media Support With Alignment Holes For VP 549 Wash Reservoir Series And Guides For Blotting Media, Constructed From G10

vp-scientific

VP 540BC

384 HOLE LINT FREE BLOTTING MEDIA, 10/PKG, FITS ON VP 540B1 SUPPORT

vp-scientific

VP 540BC-1

Blotting Paper, lint free, 384 holes, fits on VP 540B2 Blotting Paper Support for VP 549 series Spillway Wash Reservoirs, 10/pkg

vp-scientific

VP 540C-12

LINT FREE BLOTTING PAPER WITH 12 FLAPS AND TABS, 105 mm X 140 mm X 0.4mm

vp-scientific

VP 540C-24

LINT FREE BLOTTING PAPER WITH 24 FLAPS AND TABS, 105 mm X 140 mm X 0.4mm

vp-scientific

VP 540D

LINT FREE BLOTTING MEDIA, CUT TO FIT INTO AN OMNI TRAY, 10/PKG

vp-scientific

VP 540D-100

LINT FREE BLOTTING MEDIA, CUT TO FIT INTO AN OMNI TRAY, 100/PKG

vp-scientific

VP 540DB

HEAVY DUTY BLOTTING SYSTEM, SUPER ABSORBENT PAD WITH LINT-FREE BLOTTING MEDIA IN AN OMNI TRAY, 10/PKG

vp-scientific

VP 540DB-100

HEAVY DUTY BLOTTING SYSTEM, SUPER ABSORBENT PAD WITH LINT-FREE BLOTTING MEDIA IN AN OMNI TRAY, 10 PACKAGES OF 10

vp-scientific

VP 540DB.4

HEAVY DUTY BLOTTING SYSTEM, SUPER ABSORBENT PAD WITH LINT-FREE BLOTTING MEDIA IN AN OMNI TRAY, 4/PKG

vp-scientific

VP 540DB.6

HEAVY DUTY BLOTTING SYSTEM, SUPER ABSORBENT PAD WITH LINT-FREE BLOTTING MEDIA IN AN OMNI TRAY, 6/PKG

vp-scientific

VP 540DB1

SUPER ABSORBENT POLYPROPYLENE PAD CUT TO FIT IN AN OMNI TRAY, PACKAGE OF 10

vp-scientific

VP 540DB1-100

SUPER ABSORBENT POLYPROPYLENE PAD CUT TO FIT IN AN OMNI TRAY, PACKAGE OF 100

vp-scientific

VP 540DB2

Super Absorbent Polypropylene Pad, 115mm x 160mm, 10/pkg

vp-scientific

VP 540DB2-100

Super Absorbent Polypropylene Pad, 115mm x 160mm, 100/pkg

vp-scientific

VP 540F

G10 BAFFLES FOR VP 540PCB RESERVOIR, SET OF 13

vp-scientific

VP 540F-1

G10 BAFFLES FOR VP 540-1 RESERVOIRS, 73.6mm WIDE, 22.7mm TALL, SET OF 11,

vp-scientific

VP 540L

SINGLE POLYPROPYLENE WASH RESERVOIR WITH SLOTS FOR 7 VP 540LF BAFFLES

vp-scientific

VP 540L-1536

SINGLE NI-LUBE COATED ALUMINUM WASH RESERVOIR WITH SLOTS FOR 3 VP 540LF-1536 BAFFLES

vp-scientific

VP 540L-PTFE

SINGLE PTFE WASH RESERVOIR WITH SLOTS FOR 7 VP 540LF-PTFE BAFFLES

vp-scientific

VP 540LF

G10 BAFFLES FOR VP 540L RESERVOIRS, 25mm TALL, SET OF 7

vp-scientific

VP 540LF-1536

NI-LUBE COATED ALUMINUM BAFFLES FOR VP 540L-1536 RESERVOIR, SET OF 3

vp-scientific

VP 540LF-PTFE

ANODIZED ALUMINUM - PTFE COATED BAFFLES FOR VP 540L-PTFE RESERVOIRS, 25mm TALL, SET OF 7

vp-scientific

VP 540M

ADAPTOR FOR MULTIMEK PIPETTE TIP LOADER/PIPETTE WASH STATION, ALIGNS TO TWO PINS ON DECK AND HOLDS VP 540, VP 542 OR MICROPLATE

vp-scientific

VP 540PCB

SINGLE PTFE WASH RESERVOIR WITH SLOTS FOR 13 BAFFLES, 2.54cm DEEP, EACH

vp-scientific

VP 540S

POLYPROPYLENE RESERVOIR HOLDING VP 426 SCRUB PAD FOR PIN CLEANING. SBS FEATURE ON THE BOTTOM FOR DECK PLACEMENT, EACH.

vp-scientific

VP 540T

SINGLE POLYPROPYLENE WASH RESERVOIR WITH SLOTS FOR 13 BAFFLES AND A FILL AND DRAIN NIPPLE, EACH

vp-scientific

VP 541

DUAL INTERDIGITATED WASH CHAMBER RESERVOIR SYSTEM

vp-scientific

VP 541T

DUAL INTERDIGITATED WASH CHAMBER RESERVOIR SYSTEM WITH FILL AND DRAIN

vp-scientific

VP 542

LOW PROFILE POLYPROPYLENE WASH RESERVOIR WITH SLOTS FOR 13 BAFFLES, 1.5cm DEEP, EACH

vp-scientific

VP 542D

VP 542 WITH 384 DIMPLED BOTTOM, AND SLOTS FOR13 BAFFLES,

vp-scientific

VP 542F

G10 BAFFLES FOR VP 542 RESERVOIRS 12.5mm TALL, SET OF 13

vp-scientific

VP 542M

SINGLE POLYPROPYLENE REAGENT RESERVOIR WITH RECESSED NOTCHES FOR 13 BAFFLES

vp-scientific

VP 542MF

G10 BAFFLES FOR VP 542M RESERVOIRS, 9.5 mm TALL, SET OF 13

vp-scientific

VP 542ML

BLACK DELRIN LID WITH LIP TO COVER VP 542M RESERVOIR

vp-scientific

VP 542T

SINGLE POLYPROPYLENE WASH RESERVOIR WITH SLOTS FOR 13 BAFFLES, 1.5cm DEEP, 4 LOCATING PINS FILL AND DRAIN NIPPLES

vp-scientific

VP 545

96 FOUNTAIN WASH RESERVOIR WITH PTFE FOUNTAINS AND PTFE COATED ALUMINUM BASE, FOR CYBI WELL ROBOT WITH FOUNTAIN AND DRAIN NIPPLES

vp-scientific

VP 546

384 FOUNTAIN WASH RESERVOIR WITH PTFE FOUNTAINS AND PTFE COATED ALUMINUM BASE, FOR CYBI WELL ROBOT WITH FOUNTAIN AND DRAIN NIPPLES

vp-scientific

VP 546A

384 FOUNTAIN WASH RESERVOIR WITH FLAT FACED PTFE FOUNTAINS AND PTFE COATED ALUMINUM BASE, FOR ALL ROBOT SYSTEMS, 127mm x 111mm x 26mm

vp-scientific

VP 546A1T

384 FOUNTAIN WASH RESERVOIR WITH BEVEL FACED PTFE FOUNTAINS, 25 mm TALL AND PTFE COATED ALUMINUM BASE, FOR ALL ROBOT SYSTEMS, 127mm x 111mm x 47mm

vp-scientific

VP 546B

384 FOUNTAIN WASH RESERVOIR WITH PTFE FOUNTAINS AND PTFE COATED ALUMINUM BASE, FOR CYBI WELL ROBOT WITH FOUNTAIN AND DRAIN NIPPLES, LUER FITTINGS AND THICKER BASE THAN VP 546

vp-scientific

VP 547

96 DUAL PTFE IMPREGNATED ALUMINUM FOUNTAIN WASH RESERVOIR FOR CYBI WELL ROBOT WITH 2 DIFFERENT FOUNTAIN NIPPLES AND A COMMON DRAIN NIPPLE

vp-scientific

VP 549ETOH

ALCOHOL WASH RESERVOIR WITH RUNNING FLUIDS OVER A SPILLWAY AND TAKEN TO WASTE BOTTLE. RESERVOIR CONSTRUCTED FROM POLYPROPYLENE

vp-scientific

VP 549ETOH-2

Alcohol Wash Reservoir With Running Fluids Over Spillway, Polypropylene. Inlet & Outlet Luer Ports On Same Side Of Reservoir. Pins At 2 Corners To Hold Blotting Support.

vp-scientific

VP 549ETOH-4

Spillway Reservoir for washing pins or tips in SBS format with continuous flow, spillway designed for alcohols and DMSO, 2 options for inlet and outlet ports, pins for blotting support, polypropylene.

vp-scientific

VP 549ETOH-RF-1

Rapid Flush Alcohol Wash Reservoir With Running Fluids Over A Spillway. Large Inlet And Outlet Ports From Chamber Plus Small Outlet From Spillway. Two Guidepins For Alignment Of Blotting Media Support. Constructed From Polypropylene.

vp-scientific

VP 549H2O

WATER WASH RESERVOIR WITH RUNNING FLUIDS OVER A SPILLWAY AND TAKEN TO WASTE BOTTLE. RESERVOIR CONSTRUCTED FROM POLYPROPYLENE

vp-scientific

VP 549H2O-2

Water Wash Reservoir With Running Fluids Over Spillway, Polypropylene. Inlet & Outlet Luer Ports On Same Side Of Reservoir. Pins At 2 Corners To Hold Blotting Support.

vp-scientific

VP 549H2O-4

Water Wash Reservoir With Running Fluids Over Spillway, Polypropylene. Inlet & Outlet Luer Ports On Opposite Short Sides. Pins At 2 Corners To Hold Blotting Support.

vp-scientific

VP 549H2O-RF

RAPID FLUSH WATER WASH RESERVOIR WITH RUNNING FLUIDS OVER A SPILLWAY AND TAKEN TO WASTE BOTTLE. RESERVOIR CONSTRUCTED FROM POLYPROPYLENE

vp-scientific

VP 549PE-1

SPILLWAY RESERVOIR, PERKINELMER STYLE WITH QUICK DISCONNECT FITTINGS ON BOTTOM

vp-scientific

VP 549PE-EP3

SPILLWAY RESERVOIR, PERKINELMER STYLE WITH QUICK DISCONNECT FITTINGS ON SIDE

vp-scientific

VP 550A

DOCKING STATION FOR ROBOT FLOATING PIN TOOLS - WILL ACCOMMODATE 12 TO 30mm EXPOSED LENGTH PINS

vp-scientific

VP 550A-HA

Docking Station for the Hamamatsu and Agilent Pin Tools

vp-scientific

VP 550A-PE

Docking Station for the PerkinElmer Style Pin Tools

vp-scientific

VP 550A-S-S

Safe Shipping System

vp-scientific

VP 550A-TeMO

TECAN TeMO ROBOT ADAPTER PLATE WITH BALL DETENTS AND LOCATING PINS PLUS VP 550A

vp-scientific

VP 550B

Docking Station For Robot Floating Pin Tools - Will Accommodate up to 42mm Exposed Length Pins

vp-scientific

VP 550D

Docking Station for disposable pin tools, both standard and deep well versions

vp-scientific

VP 550E

Docking Station for Pin Tools used with Tecan MCA384 Head and BMPTECAN384-10, -11, or -12.

vp-scientific

VP 551

Centrifuge Plate Holder, Oversized SBS Footprint With An SBS Pocket And Reservoir At Bottom To Hold Up To 277ml. Made From 6061 Aluminum, Clear Hard Anodize Coating. Designed For Qiagen Minelute Filter Plate. Reservoir Fits Hermle Z300-Rotor 220.50 V06.

vp-scientific

VP 555

UNIVERSAL ROBOT PIN TOOL STORAGE/DOCKING STATION

vp-scientific

VP 560

PERISTALTIC PUMP KIT, INCLUDES PUMP, 3 PUMP HEADS AND MOUNTS COMPUTER CONTROL SOFTWARE, RS 232 CABLE, 25' OF 6mm ID VITON TUBING, 25' 8mm ID VITON TUBING

vp-scientific

VP 561T

Vacuum trap with automatic overfill shutoff, 3000mL size

vp-scientific

VP 565

1 LITER LOW DENSITY POLYETHYLENE NALGENE BOTTLE WITH 0.91 METER TALL RING STAND WITH SBS BASE, RING STAND CLAMP, TUBING, TUBING CLAMP AND VELCRO STRAP

vp-scientific

VP 566A

1 GAL./4L LOW DENSITY POLYETHYLENE CARBOY WITH TUBE ATTACHMENT ON BOTTOM. COMES WITH TUBING, PINCH CLAMP AND VP 567D FLOW RESTRICTOR

vp-scientific

VP 567B

0.127 MM DIAMETER FLOW RESTRICTOR

vp-scientific

VP 567C

0.254 MM DIAMETER FLOW RESTRICTOR

vp-scientific

VP 567D

0.508 MM DIAMETER FLOW RESTRICTOR

vp-scientific

VP 567E

0.965 MM DIAMETER FLOW RESTRICTOR

vp-scientific

VP 570L

LOW PROFILE RESERVOIR, FLAT BOTTOM, NATURAL POLYPROPYLENE, 25/CASE

vp-scientific

VP 572

12 COLUMN RESERVOIR, V BOTTOM, NATURAL POLYPROPYLENE, 25/CASE

vp-scientific

VP 572C-24

24 COLUMN RESERVOIR, LOW PROFILE, PYRAMID BOTTOM, NATURAL POLYPROPYLENE, 25/CASE

vp-scientific

VP 572DC

12 COLUMN RESERVOIR, PARTITIONED, V BOTTOM, NATURAL POLYPROPYLENE, 25/CASE

vp-scientific

VP 572DC-4

4 COLUMN RESERVOIR, PARTITIONED, V BOTTOM, NATURAL POLYPROPYLENE, 25/CASE

vp-scientific

VP 572DC-6

6 COLUMN RESERVOIR, PARTITIONED, V BOTTOM, NATURAL POLYPROPYLENE, 25/CASE

vp-scientific

VP 574D

384 WELL RESERVOIR, PYRAMID BOTTOM, NATURAL POLYPROPYLENE, 25/CASE

vp-scientific

VP 574D-4

384 WELL RESERVOIR WITH FOUR CONTROLLED COLUMNS, RESERVOIR VOLUME 155ml, CONTROL WELL COLUMN 2.60ml, 25/CASE

vp-scientific

VP 574L

384 WELL RESERVOIR, LOW PROFILE, PYRAMID BOTTOM, NATURAL POLYPROPYLENE, 25/CASE

vp-scientific

VP 574L-5

384 WELL, 5 PARTITIONED RESERVOIR, LOW PROFILE, PYRAMID BOTTOM, WITH WAVE BREAKERS. 25/CASE

vp-scientific

VP 576D

96 WELL RESERVOIR, PYRAMID BOTTOM, NATURAL POLYPROPYLENE, 25/CASE

vp-scientific

VP 576L

96 WELL RESERVOIR, LOW PROFILE, PYRAMID BOTTOM, NATURAL POLYPROPYLENE, 25/CASE

vp-scientific

VP 578D

8 ROW RESERVOIR, V BOTTOM, NATURAL POLYPROPYLENE, 25/CASE

vp-scientific

VP 578DC

8 ROW RESERVOIR, PARTITIONED, V BOTTOM, NATURAL POLYPROPYLENE, 25/CASE

vp-scientific

VP 578LC

8 Column, Low Profile, Partitioned, V-Bottom, Natural Polypropylene Reservoir

vp-scientific

VP 581

WARPED PCR PLATE FLATTENER

vp-scientific

VP 581-PE

POLYCARBONATE ADAPTOR PLATE FOR ATTACHING VP 710C1-M OR VP 710C1-MCE TO THE DECK OF A PERKIN ELMER EP3 OR JANUS WORK STATION. TWO LOCATING PINS LOCATE INTO HOLES IN THE WORK STATION DECK.

vp-scientific

VP 581-PE-2

Polycarbonate Adaptor Plate for Attaching 8-Channel Magnetic Clutch, Direct-Drive Bubble Paddle Reservoirs

vp-scientific

VP 581A

POLYPROPYLENE SBS BLOCK ADAPTOR 18 MM THICK WITH ACCESSORY MOUNTING HOLES

vp-scientific

VP 581A-MICA

MUSCOVITE VERY HIGH TEMPERATURE MICA SBS BLOCK ADAPTOR 19 MM THICK WITH ACCESSORY MOUNTING HOLES - FOR HEAT BLOCK USAGE

vp-scientific

VP 581B

POLYPROPYLENE SBS BLOCK ADAPTOR 12.5 MM THICK WITH ACCESSORY MOUNTING HOLES

vp-scientific

VP 581B-1536

POLYPROPYLENE SBS BLOCK ADAPTOR 12.5 MM THICK MOUNTING PLATE FOR H+P 1536 ESHAKE

vp-scientific

VP 581B-MICA

MUSCOVITE VERY HIGH TEMPERATURE MICA SBS BLOCK ADAPTOR 13 MM THICK WITH ACCESSORY MOUNTING HOLES - FOR HEAT BLOCK USAGE

vp-scientific

VP 581B-PTFE

PTFE SBS BLOCK ADAPTOR 12.5 MM THICK WITH ACCESSORY MOUNTING HOLES

vp-scientific

VP 581C-AL

MICROPLATE COOLER BLOCK, SBS FEATURE ON THE BOTTOM AND AN SBS HOLDER ON THE TOP, OVER ALL HEIGHT = 2.54 CM MADE FROM ALUMINUM AND BLACK ANODIZED

vp-scientific

VP 581D

Polypropylene SBS Block Adaptor 12.5mm thick with accessory mounting holes.

vp-scientific

VP 581R

RAISED POLYPROPYLENE SBS FEATURE FOR SPILLWAY RESERVOIRS

vp-scientific

VP 581R-HL

SBS plate adapter with SBS holder on the top, straight sides, 4 holes for attachment to Hamilton plate holder support legs, 0.5" tall, black anodized aluminum.

vp-scientific

VP 590

A custom Delrin Test Tube Rack that can hold two 50 ml Centrifuge Tubes, six 15 ml Centrifuge Tubes and 12 Micro Centrifuge tubes.

vp-scientific

VP 601

LIQUID LEVEL DETECTION SYSTEM INCLUDING AMPLIFIER, AC-OUT CONTROL, CURRENT LOOP CONTROL AND POWER SUPPLY

vp-scientific

VP 601A

FIBER OPTIC LED LIQUID LEVEL SENSOR WITH TRANSMITTER AND RECEIVER

vp-scientific

VP 601B-1

SBS PLATE MOUNTING SYSTEM FOR LIQUID LEVEL SENSOR

vp-scientific

VP 601C

DB15 CONTROL CONNECTOR FOR BARNANT CORP. MODEL MASTERFLEX #7550-20 PERISTALTIC PUMP

vp-scientific

VP 601D

POWER SUPPLY AND TUBING PINCH VALVE.

vp-scientific

VP 612

12 INCH HOOK & LOOP STRAP (HOLDS BUNDLE OF 5 PLATES) - 10/PKG

vp-scientific

VP 614

14 INCH NYLON CABLE TIES - 50/PKG

vp-scientific

VP 618

18 INCH HOOK & LOOP STRAP (HOLDS BUNDLE OF 8 PLATES) - 10/PKG

vp-scientific

VP 619

RUBBERBANDS (HOLDS BUNDLES OF 1 PLATE TO 10 PLATES) - 20/PKG

vp-scientific

VP 624

24 INCH NYLON CABLE TIES - 50/PKG

vp-scientific

VP 625

24 INCH HOOK & LOOP STRAP (HOLDS BUNDLE OF 12 PLATES) - 10/PKG

vp-scientific

VP 632

FOAMED SILICON RUBBER GASKETS - 10/PKG

vp-scientific

VP 640

LID SPACERS - 10/PKG

vp-scientific

VP 650

BUNDLE BOTTOMS - 5/PKG

vp-scientific

VP 651

BUNDLE TOPS - 5/PKG

vp-scientific

VP 670

CABLE TIE GUN

vp-scientific

VP 680

CABLE TIE CUTTER

vp-scientific

VP 690

SILICONE GREASE - 5.3 oz. TUBE

vp-scientific

VP 700

PROGRAMMABLE SMART SWITCH, WITH SOFTWARE TO SEPARAY CONTROL ON OFF FUNCTIONS OF 3 POWER OUTLETS, EACH OUTLET HAS A 5 AMP CIRCUIT BREAKER, OPERATES OFF 115 VOLTS, 60 CYCLES

vp-scientific

VP 700-15

PROGRAMMABLE SMART SWITCH, WITH SOFTWARE TO SEPARAY CONTROL ON OFF FUNCTIONS OF 3 POWER OUTLETS, ONE OUTLET HAS A 15 AMP CIRCUIT BREAKER AND THE OTHER TWO HAVE 2 AMP CIRCUIT BREAKERS, OPERATES OFF 115 VOLTS, 60 CYCLES

vp-scientific

VP 700-15CE

PROGRAMMABLE SMART SWITCH, WITH SOFTWARE TO SEPARAY CONTROL ON OFF FUNCTIONS OF 3 POWER OUTLETS, ONE OUTLET HAS A 15 AMP CIRCUIT BREAKER AND THE OTHER TWO HAVE 2 AMP CIRCUIT BREAKERS, OPERATES OFF .230 VOLTS, 50 CYCLES, CE COMPLIANT

vp-scientific

VP 700-QS

Quick Switch To Separay Control On/Off Functions Of 1 Power Outlet. 115Volts, 60Hz. Each.

vp-scientific

VP 700A

Programmable Smart Switch for computer control of one device via a single 6A 110V outlet, connects to computer by USB, allows on/off control direct from computer and at pre-set times.

vp-scientific

VP 700A-4

Programmable Smart Switch for computer control of four devices via four 1, 120V outlets, connects to computer by Ethernet(RJ45) or Serial port, built-in web server allows control from any network computer, a directly connected computer, or a smartphone.

vp-scientific

VP 700CE

PROGRAMMABLE SMART SWITCH, WITH SOFTWARE TO SEPARAY CONTROL ON OFF FUNCTIONS OF 3 POWER OUTLETS, EACH OUTLET HAS A 5 AMP CIRCUIT BREAKER, OPERATES OFF 230 VOLTS, 50 CYCLES, CE COMPLIANT

vp-scientific

VP 701

MAGNETIC TUMBLE STIRRER - MANUAL - FOUR PLATE

vp-scientific

VP 706-1

Mega Stirrus 1 Horizontal Magnetic Stirrer With NdFeB Drive Magnet Powered By A 3/8 Horse Power AC Inverter Duty Motor And Operates At Speeds From 30 To 300 RPM.

vp-scientific

VP 706-2

Mega Stirrus 2 Horizontal Magnetic Stirrer With NdFeB Drive Magnet Powered By A Brushless 90 Watt Motor (1/9 HP) And Operates At Speeds From 100 To 450 RPM.

vp-scientific

VP 706-7

SEVEN POSITION STIRRER, 100 TO 2,500 RPM, 120 VOLTS AC.

vp-scientific

VP 706B-1

MINI STIRRUS HORIZONTAL MAGNETIC STIRRER WITH A 22.86 CM BY 22.86 CM FOOT PRINT, 115 VOLTS AC

vp-scientific

VP 706B-3

MINI STIRRUS HORIZONTAL/VORTEX MAGNETIC STIRRER WITH A 22.86 CM BY 22.86 CM FOOT PRINT, AND A VORTEX CAVITY FOR ONE MICROPLATE. 115 VOLTS AC

vp-scientific

VP 706B-4H

HORIZONTAL MAGNETIC STIRRER/HEATERwith Red Lion Temperature control(22 C to 140C) and speed control from 100 to 2000 RPM, operates on 120 Volts AC

vp-scientific

VP 706B-5

VP 706B-5 Mini Stirrus Horizontal/Vortex Magnetic Stirrer With A 22.86cm By 22.86cm Foot Print, And 15.24cm top plate with a 8.89cm ring containing 12 holes to accommodate 12 cryotubes. Magnet speed = 5000 RPM, 115 Volts AC

vp-scientific

VP 707

LEVITATION MAGNETIC STIRRER - MANUAL TYPE - STIRS ONE DEEP WELL PLATE

vp-scientific

VP 707-1

TEMPERATURE CONTROLLED ENVIRONMENTAL CHAMBER FOR CAROUSEL SERIES LEVITATION STIRRERS

vp-scientific

VP 707-1CE

CE COMPLIANT TEMPERATURE CONTROLLED ENVIRONMENTAL CHAMBER FOR CAROUSEL SERIES LEVITATION STIRRERS, 230 VOLT, 50 HZ

vp-scientific

VP 707-2

COUNT DOWN TIMER CONTROL FOR CAROUSEL SERIES LEVITATION STIRRERS

vp-scientific

VP 707-3

COMPUTER CONTROLLED OPERATION FOR CAROUSEL SERIES LEVITATION STIRRERS

vp-scientific

VP 707B1

LEVITATION MAGNETIC STIRRER - CAROUSEL TYPE - STIRS 12 DEEP WELL MICROPLATES, 1 LIFT STATION - 115 VOLTS AC - 60 HZ

vp-scientific

VP 707B1CE

LEVITATION MAGNETIC STIRRER - CAROUSEL TYPE - STIRS 12 DEEP WELL MICROPLATES, 1 LIFT STATION - 230 VOLTS AC - 50 HZ

vp-scientific

VP 707B2

LEVITATION MAGNETIC STIRRER - CAROUSEL TYPE - STIRS 12 DEEP WELL MICROPLATES AT UP TO 56 LIFTS/MINUTE, 2 LIFT STATIONS - 115 VOLTS AC, 60 HZ

vp-scientific

VP 707B2CE

LEVITATION MAGNETIC STIRRER - CAROUSEL TYPE - STIRS 12 DEEP WELL MICROPLATES AT UP TO 56 LIFTS/MINUTE, 2 LIFT STATIONS - 230 VOLTS AC, 50 HZ, CE COMPLIANT

vp-scientific

VP 707B4

LEVITATION MAGNETIC STIRRER - CAROUSEL TYPE - STIRS 12 DEEP WELL MICROPLATES,4 LIFT STATIONS - 115 VOLTS AC - 60 HZ

vp-scientific

VP 707B4CE

LEVITATION MAGNETIC STIRRER - CAROUSEL TYPE - STIRS 12 DEEP WELL MICROPLATES, 4 LIFT STATIONS - 230 VOLTS AC - 50 HZ

vp-scientific

VP 707C

LINEAR SHUTTLE MAGNETIC LEVITATION STIRRER WITH SERVO MOTOR, 115 V AC 60 HZ,

vp-scientific

VP 707CCE

LINEAR SHUTTLE MAGNETIC LEVITATION STIRRER WITH SERVO MOTOR, 230 V AC 50 HZ, CE COMPLIANT

vp-scientific

VP 707EC

Magnetic Levitation Stirrer for Automation. The VP 707EC is a magnetic levitation stirrer designed for use on robotic workstations. This stirrer is fully programmable and computer controlled via USB or RS232 serial ports. Actuated grippers load and unload the plate, allowing it to be fully integrated into an automated platform, with no human intervention necessary. Parameters including stirring speed, height of stir element motion, and grip strength are all fully adjustable.

vp-scientific

VP 708-CON

BASE TO HOLD VP 710C1 VERTICAL WITH 5 SHELVES TO HOLD PLATES ON BOTH SIDES OF THE STIRRER

vp-scientific

VP 708-CON-1

VP 710G6 WITH BASE PLATE ON THE END SO THE STIRRER CAN STAND UPRIGHT.

vp-scientific

VP 708A

VORTEX MICROPLATE MAGNETIC LATERAL TUMBLE STIRRER WITH BRUSHLESS MOTOR 115VAC 60 HZ AND DIGITAL RPM READOUT

vp-scientific

VP 708A-1

-

vp-scientific

VP 708A-L-PLATTER

LANDSCAPE VIEW PLATTER WITH EXPOSED BOTTOM FOR VP 708A

vp-scientific

VP 708ACE

VORTEX MICROPLATE MAGNETIC LATERAL TUMBLE STIRRER WITH BRUSHLESS MOTOR 230VAC 50 HZ AND DIGITAL RPM READOUT, CE COMPLIANT

vp-scientific

VP 708S

SUPER VORTEX MICROPLATE MAGNETIC LATERAL TUMBLE STIRRER WITH BRUSHLESS MOTOR 115VAC 60 HZ AND DIGITAL RPM READOUT

vp-scientific

VP 710-3

COMPUTER CONTROLLED OPERATION FOR VP 710 ROTARY SERIES TUMBLE STIRRERS

vp-scientific

VP 710-CC

Computer Control Software, for select VP 710 Magnetic Tumble Stirrers, including VP 710C3 series and VP 710E3 series

vp-scientific

VP 710-RPM

BATTERY POWERED HALL SENSOR RPM METER

vp-scientific

VP 710A

ROTARY MAGNETIC TUMBLE STIRRER, HIGH SPEED - STIRS 9 DEEP WELL PLATES - 115 VOLTS AC - 60 HZ

vp-scientific

VP 710ACE

ROTARY MAGNETIC TUMBLE STIRRER, HIGH SPEED - STIRS 9 DEEP WELL PLATES - 230 VOLTS AC - 50 HZ

vp-scientific

VP 710C-6

Magnetic Tumble Stirring Cylinder (US Patents # 6,176,6097 and 7,484,880), 6 inch (15.3cm) magnet length, 48 MGO, with spindle, bearings and bearing mounts, 8.1inch (20.5cm) overall length.

vp-scientific

VP 710C-7

Magnetic Tumble Stirring Cylinder (US Patents # 6,176,6097 and 7,484,880), 7 inch (17.8cm) magnet length, 48 MGO, with spindle, bearings and bearing mounts, 9.2 inch (23.3cm) overall length.

vp-scientific

VP 710C1

ROTARY MAGNETIC TUMBLE STIRRER, HIGH SPEED, 14cm LONG USABLE STIRRING DECK, WITH MOTOR HOUSING AND PLATE HOLDER, STIRS 2 DEEP WELL MICROPLATES OR 6 STANDARD MICROPLATES-115 VOLTS AC - 60 HZ

vp-scientific

VP 710C1-ALPFX

ROTARY MAGNETIC TUMBLE STIRRER, HIGH SPEED, 14cm LONG USABLE STIRRING DECK, MOUNTS TO THE BOTTOM OF V&P FXALP-FM ON THE BECKMAN FX WORKSTATION, 115 VOLTS AC - 60 HZ

vp-scientific

VP 710C1-ALPFXCE

ROTARY MAGNETIC TUMBLE STIRRER, HIGH SPEED, 14cm LONG USABLE STIRRING DECK, MOUNTS TO THE BOTTOM OF V&P FXALP-FM ON THE BECKMAN FX WORKSTATION, 230 VOLTS AC - 50 HZ, CE COMPLIANT

vp-scientific

VP 710C1-M

ROTARY MAGNETIC TUMBLE STIRRER, HIGH SPEED, 14cm LONG USABLE STIRRING DECK, MOUNTS TO MULTIPLE ROBOT DECKS INCLUDING BECKMAN FX & NX, TECAN EVO, PERKIN ELMER EP3 & JANUS, CALIPER SCICLONE, HAMILTON MICROLAB STAR AND MANY OTHERS, 115 VOLTS AC - 60 HZ

vp-scientific

VP 710C1-M-KIT

ROTARY MAGNETIC TUMBLE STIRRER, HIGH SPEED, 14cm LONG USABLE STIRRING DECK, MOUNTS TO MULTIPLE ROBOT DECKS INCLUDING BECKMAN FX & NX, TECAN EVO, PERKIN ELMER EP3 & JANUS, CALIPER SCICLONE, HAMILTON MICROLAB STAR AND MANY OTHERS, 115 VOLTS AC - 60 HZ, INCL

vp-scientific

VP 710C1-MCE

ROTARY MAGNETIC TUMBLE STIRRER, HIGH SPEED, 14cm LONG USABLE STIRRING DECK, MOUNTS TO MULTIPLE ROBOT DECKS INCLUDING BECKMAN FX & NX, TECAN EVO, PERKIN ELMER EP3 & JANUS, CALIPER SCICLONE AND HAMILTON MICROLAB STAR AND MANY OTHERS, 230 VOLTS AC - 50 HZ, C

vp-scientific

VP 710C1-MCE-KIT

ROTARY MAGNETIC TUMBLE STIRRER, HIGH SPEED, 14cm LONG USABLE STIRRING DECK, MOUNTS TO MULTIPLE ROBOT DECKS INCLUDING BECKMAN FX & NX, TECAN EVO, PERKIN ELMER EP3 & JANUS, CALIPER SCICLONE AND HAMILTON MICROLAB STAR AND MANY OTHERS, 230 VOLTS AC - 50 HZ, C

vp-scientific

VP 710C1CE

ROTARY MAGNETIC TUMBLE STIRRER, HIGH SPEED, 14cm LONG USABLE STIRRING DECK, STIRS 2 DEEP WELL MICROPLATES OR 6 STANDARD MICROPLATES -EUROPEAN 230 VOLTS AND 50 HERTZ CONTROLLER, CE COMPLIANT

vp-scientific

VP 710C3

Stepper Motor powered Rotary Magnetic Tumble Stirrer, high speed and high torque, 14cm long usable stirring deck, with motor housing and plate holder, stirs 2 deep well microplates or 6 standard microplates-115 volts AC - 60 Hz

vp-scientific

VP 710C3-1

Microplate Deck Gray PVC

vp-scientific

VP 710C3-2

Microplate Deck Mica

vp-scientific

VP 710C3-3

Stand to convert to Vortex stirring, 3 shelves

vp-scientific

VP 710C3-4

Stand to convert to Vortex stirring, base only

vp-scientific

VP 710C3CE

Stepper Motor powered Rotary Magnetic Tumble Stirrer, high speed and high torque, 14cm long usable stirring deck, with motor housing and plate holder, stirs 2 deep well microplates or 6 standard microplates-230 volts AC - 50 Hz

vp-scientific

VP 710C3P

Stepper Motor powered Rotary Magnetic Tumble Stirrer, high speed and high torque, 14cm long usable stirring deck, with motor housing, and VP 710C3P-1 heat resistant mica plate holder for single position heat block-115 volts AC - 60 Hz

vp-scientific

VP 710C3P-1

Microplate Holder, for VP 710C3P series Tumble Stirrers, made of Mica, heat resistant to protect Stirrer, single SBS pocket for VP 741ABZ series or VP 741BBZ series Heating Blocks

vp-scientific

VP 710C3PCE

Stepper Motor powered Rotary Magnetic Tumble Stirrer, high speed and high torque, 14cm long usable stirring deck, with motor housing, and VP 710C3P-1 heat resistant mica plate holder for single position heat block-220 volts AC - 50 Hz

vp-scientific

VP 710C4

Stepper Motor powered Rotary Magnetic Tumble Stirrer, high speed and high torque, 14cm long usable stirring deck, with motor housing and plate holder, stirs 2 deep well microplates or 6 standard microplates-115 volts AC - 60 Hz

vp-scientific

VP 710C4-1

Cover plate for VP 710C4

vp-scientific

VP 710C4-2

Single microplate position mica deck for VP 710C4.

vp-scientific

VP 710C4-7

Magnetic Tumble Stirrer, robot gripper accessible, powered by stepper motor, high speed and high torque, stirs up to 12 standard microplates, 16.5 cm long stir area, provides heavy load and/or long time stirring, 110 V, 60 Hz

vp-scientific

VP 710C4-7CE

Magnetic Tumble Stirrer, robot gripper accessible, powered by stepper motor, high speed and high torque, stirs up to 12 standard microplates, 16.5 cm long stir area, provides heavy load and/or long time stirring, 220 V, 50/60 Hz, CE compliant

vp-scientific

VP 710C4CE

Stepper Motor powered Rotary Magnetic Tumble Stirrer, high speed and high torque, 14cm long usable stirring deck, with motor housing and plate holder, stirs 2 deep well microplates or 6 standard microplates-220 volts AC - 50 Hz

vp-scientific

VP 710CS

Rotary Tumble Stirrer with 10" magnet cylinder, Smart Motor to fit into Chemspeed Robot basket rack.

vp-scientific

VP 710D

Rotary Magnetic Tumble Stirrer, 1250 Max RPM, 25mm Long Magnetic Cylinder, 115 Volts AC - 60 Hz

vp-scientific

VP 710D-1

Rotary Magnetic Tumble Stirrer, 1250 max RPM, 25mm long magnetic cylinder, 115 volts AC - 60 Hz, with SBS stir deck for VP 750 series Bubble Paddle Reservoirs with SBS footprint.

vp-scientific

VP 710D2

Rotary Magnetic Tumble Stirrer, 1250 Max RPM, 25mm Long Magnetic Cylinder, 115 Volts AC - 60 Hz.

vp-scientific

VP 710D2-1

VP 710D2 accessory deck to hold VP 756B Bubble Paddle Reservoir.

vp-scientific

VP 710D2-2

VP 710D2 Accessory holder to hold SBS-dimensioned reservoirs (127.7 mm X 85.5 mm).

vp-scientific

VP 710D2-3

Accessory stand to hold the VP 710D2 upright for powerful conventional stirring or lateral vortex stirring.

vp-scientific

VP 710D2-4

VP 710D2 accessory kit for use with Syringe Pumps, includes lab support stand, aluminum arm to attach to VP 710D2, clamp, plastic syringe holder for KD Scientific Pump (Legato210).

vp-scientific

VP 710D2-4A

P 710D2 accessory for use with Syringe Pumps, plastic syringe holder, made for KD Scientific Pump (Legato210) that holds two syringes of same size.

vp-scientific

VP 710D2-4B

VP 710D2 accessory for use with Syringe Pumps, aluminum arm for attaching VP 710D2 to a lab support stand.

vp-scientific

VP 710D2-5

Accessory deck to hold VP 750-13-PP bubble paddles reservoir

vp-scientific

VP 710D2CE

Rotary Magnetic Tumble Stirrer, 1250 Max RPM, 25mm Long Magnetic Cylinder, 85-250 Volts AC, 50/60 Hz, CE compliant

vp-scientific

VP 710E-2

ROTARY MAGNETIC TUMBLE STIRRER, HIGH SPEED, 54cm LONG USABLE STIRRING DECK, STIRS 5 DEEP WELL MICROPLATES -115 VOLTS AC - 60 HZ

vp-scientific

VP 710E-2CE

ROTARY MAGNETIC TUMBLE STIRRER, HIGH SPEED, 54cm LONG - STIRS 5 DEEP WELL MICROPLATES - 48 MGO MAGNETIC CYLINDER, 230 V - 50 HZ

vp-scientific

VP 710E-2HM

Rotary Magnetic Tumble Stirrer, High Speed, 54cm Long, Deck Made From MICA - Stirs 3 Deep Well Microplates in VP 743A-1RM, 48 MGO Magnetic Cylinder, 120 V - 60 HZ

vp-scientific

VP 710E-2HM-1

Rotary Magnetic Tumble Stirrer, high speed, 54cm long deck made from mica with 3 positions for heating or cooling blocks, with insulation between each position, 48 MGO magnetic cylinder, 120 V - 60 Hz.

vp-scientific

VP 710E3

Stepper Motor powered Rotary Magnetic Tumble Stirrer, high speed and high torque, 54cm long deck made from ABS, stirs 5 deep well microplates, 48 MGO magnetic cylinder, 120 V - 60 Hz

vp-scientific

VP 710E3-1

Three position mica deck to accommodate VP 743ABLZ-R-MB three position heat block for VP 710E3 series stirrers.

vp-scientific

VP 710E3-2

Mica deck with 3 positions for heating or cooling blocks, with insulation between each position for VP 710E3 series stirrers.

vp-scientific

VP 710E3CE

Stepper Motor powered Rotary Magnetic Tumble Stirrer, high speed and high torque, 54cm long deck made from ABS, stirs 5 deep well microplates, 48 MGO magnetic cylinder, 220 V - 50 Hz

vp-scientific

VP 710F

MINI ROTARY MAGNETIC TUMBLE STIRRER, HIGH SPEED, FLEXIBLE DRIVE, STIRS 1 MICROPLATE ON WORKSTATION DECK, 115 VOLTS AC 60 HZ

vp-scientific

VP 710FCE

MINI ROTARY MAGNETIC TUMBLE STIRRER, HIGH SPEED, FLEXIBLE DRIVE, STIRS 1 MICROPLATE ON WORKSTATION DECK, 230 VOLTS AC 50 HZ

vp-scientific

VP 710FSM

-

vp-scientific

VP 710G11HM

Rotary Magnetic Tumble Stirrer, high speed, 25.4cm long usable stirring deck, deck made of Mica with 2 SBS pockets, for stirring and heating samples at the same time, 115 volts AC, 60 Hz.

vp-scientific

VP 710G6

ROTARY MAGNETIC TUMBLE STIRRER, WITH 5 TO 1 GEAR HEAD AND , 15.3 cm LONG USABLE STIRRING DECK, MADE WITH ABS PLASTIC, HEAT RESISTANT TO 60 C -115 VOLTS AC - 60 HZ

vp-scientific

VP 710G6CE

ROTARY MAGNETIC TUMBLE STIRRER, WITH 5 TO 1 GEAR HEAD AND , 15.3 cm LONG USABLE STIRRING DECK, MADE WITH ABS -230 VOLTS AC - 50 HZ, CE COMPLIANT

vp-scientific

VP 710G6HHT

ROTARY MAGNETIC TUMBLE STIRRER, WITH 5 TO 1 GEAR HEAD AND , 15.3 cm LONG USABLE STIRRING DECK, MADE WITH PEEK, TORLON AND POLYCARBONATE, HEAT RESISTANT TO 200 C, HEAT RESISTANT TO 200C -115 VOLTS AC - 60 HZ

vp-scientific

VP 710G6HHTCE

ROTARY MAGNETIC TUMBLE STIRRER, WITH 5 TO 1 GEAR HEAD AND , 15.3 cm LONG USABLE STIRRING DECK, MADE WITH PEEK, TORLON AND POLYCARBONATE, HEAT RESISTANT TO 200 C, HEAT RESISTANT TO 200C - 230 VOLTS AC - 50 HZ, CE COMPLIANT

vp-scientific

VP 710J

ROTARY MAGNETIC TUMBLE STIRRER, WITH 5 TO 1 GEAR HEAD, MAX SPEED 500 RPM AND 16cm LONG USABLE STIRRING DECK, MADE WITH POLYCARBONATE PLASTIC, HEAT RESISTANT TO 120C -115 VOLTS AC - 60 HZ

vp-scientific

VP 710J-1

ROTARY MAGNETIC TUMBLE STIRRER, MAX Z CLEARANCE, WITH 5 TO 1 GEAR HEAD, MAX SPEED 500 RPM AND 16cm LONG USABLE STIRRING DECK, MADE WITH POLYCARBONATE PLASTIC, HEAT RESISTANT TO 120C -115 VOLTS AC - 60 HZ

vp-scientific

VP 710J-1CE

ROTARY MAGNETIC TUMBLE STIRRER, MAX Z CLEARANCE, WITH 5 TO 1 GEAR HEAD, MAX SPEED 500 RPM AND 16cm LONG USABLE STIRRING DECK, MADE WITH POLYCARBONATE PLASTIC, HEAT RESISTANT TO 120C - CE COMPLIANT 230 VOLTS - 50 HZ

vp-scientific

VP 710J-AIR

ROTARY MAGNETIC TUMBLE STIRRER, WITH AN AIR MOTOR, MAX SPEED 5000 RPM AND 16cm LONG USABLE STIRRING DECK, MADE WITH POLYCARBONATE PLASTIC, HEAT RESISTANT TO 120C -115 VOLTS AC - 60 HZ

vp-scientific

VP 710JCE

ROTARY MAGNETIC TUMBLE STIRRER, WITH 5 TO 1 GEAR HEAD, MAX SPEED 500 RPM AND 16cm LONG USABLE STIRRING DECK, MADE WITH POLYCARBONATE PLASTIC, HEAT RESISTANT TO 120C - CE COMPLIANT 230 VOLTS - 50 HZ

vp-scientific

VP 710MXL7T

SLOW SPEED (10 to 89 RPM), HIGH TORQUE ROTARY MAGNETIC TUMBLE STIRRER, 16 CM LONG USABLE STIRRING DECK, MADE WITH ABS, EQUIPPED WITH TACHOMETER-115 VOLTS AC - 60 HZ

vp-scientific

VP 710MXL7TCE

SLOW SPEED (10 to 89 RPM), HIGH TORQUE ROTARY MAGNETIC TUMBLE STIRRER, 16 CM LONG USABLE STIRRING DECK, MADE WITH ABS, EQUIPPED WITH TACHOMETER-230 VOLTS AC - 50 HZ

vp-scientific

VP 710S2

SUPER ROTARY MAGNETIC TUMBLE STIRRER, HIGH SPEED - STIRS PLATFORM WITH 7 FOOT PRINTS FOR STANDARD OR DEEP WELL MICROPLATES - 115 V - 60 HZ, 48 MGO MAGNET

vp-scientific

VP 710S2CE

SUPER ROTARY MAGNETIC TUMBLE STIRRER, HIGH SPEED - STIRS PLATFORM WITH 7 FOOT PRINTS FOR STANDARD OR DEEP WELL MICROPLATES - 230 V - 50 HZ, CE COMPLIANT, 48 MGO MAGNET

vp-scientific

VP 710SM

MINI SMART MOTOR TUMBLE STIRRER WITH 15 CM MAGNETIC STIRRED AREA AND COMPUTER CONTROL, 115V - 60 HZ

vp-scientific

VP 710SM-1

LOW PROFILE, MINI SMART MOTOR TUMBLE STIRRER WITH 14 CM STIRRED AREA, 57 MM TALL. COMPUTER CONTROL, 115V - 60 HZ

vp-scientific

VP 710SM-1-2

LOW PROFILE TUMBLE STIRRER FOR BUBBLE PADDLES WITH 5CM STIRRED AREA, 57 MM TALL, POWERED BY A SMART MOTOR. BOX CONTAINS MOUNTING RIVNUTS ON TOP AND BOTTOM, 115 VOLTS

vp-scientific

VP 710SM-1-2CE

LOW PROFILE TUMBLE STIRRER FOR BUBBLE PADDLES WITH 5CM STIRRED AREA, 57 MM TALL, POWERED BY A SMART MOTOR. BOX CONTAINS MOUNTING RIVNUTS ON TOP AND BOTTOM, 230 VOLTS

vp-scientific

VP 710SM3P

MINI SMART MOTOR TUMBLE STIRRER WITH 30cm MAGNETIC STIRRED AREA AND COMPUTER CONTROL, 115V - 60HZ

vp-scientific

VP 710SM4PH

Smart Motor Tumble Stirrer With 30cm Magnetic Stirred Area And Computer Control, 115V - 60HZ, Includes Software, MICA Heat Protection and 150C resistant magnets, price each

vp-scientific

VP 710SMHT

MINI SMART MOTOR TUMBLE STIRRER WITH HEAT RESISTANT DECK FOR HEAT BLOCK APPLICATIONS AND COMPUTER CONTROL, 115V - 60 HZ

vp-scientific

VP 710SMHTCE

MINI SMART MOTOR TUMBLE STIRRER WITH HEAT RESISTANT DECK FOR HEAT BLOCK APPLICATIONS AND COMPUTER CONTROL, CE COMPLIANT 230V - 50 HZ

vp-scientific

VP 710T

ROTARY TUMBLE STIRRER, PROFILE TABLE MOUNT FOR TECAN, 30 CM STIRRED AREA, 115 V - 60HZ

vp-scientific

VP 710T-SM

Magnetic Tumble Stirrer, designed to mount to a Profile Table (not included), powered by a Smart Motor, 14" magnetic cylinder, 120V, 60 Hz

vp-scientific

VP 710T-SMCE

Magnetic Tumble Stirrer, designed to mount to a Profile Table (not included), powered by a Smart Motor, 14" magnetic cylinder, 220V, 60 Hz

vp-scientific

VP 711

TUMBLE STIR BARS - 1.57mm x 1.91mm x 4.75mm - 1000/PKG

vp-scientific

VP 711-1

PARYLENE COATED VP 711 STIR BARS- 1.67mm x 2.01mm x 4.80mm - 1000/PKG

vp-scientific

VP 711-3

TUMBLE STIR BARS - NOT DEBURRED - 1.57mm x 1.9mm x 4.75mm - 1000/PKG

vp-scientific

VP 711A-1S

DROP DISPENSER - 96 FOR VP 711, VP 711-1,VP 711D & VP 711D-1 STIR BARS, IMPROVED ANTI-JAM VERSION

vp-scientific

VP 711A-1SD

DROP DISPENSER - 96 FOR VP 711, VP 711-1,VP 711D & VP 711D-1 STIR BARS, IMPROVED ANTI-JAM VERSION FOR DEEP WELL MICROPLATES

vp-scientific

VP 711B

AUTOCLAVEABLE FLIP DISPENSER - 96 HOLES FOR VP 711

vp-scientific

VP 711D

SUPER TUMBLE STIR DOWELS - 1.93mm DIAMETER, 4.75mm LENGTH - 1000/PKG

vp-scientific

VP 711D-1

PARYLENE COATED VP 711D SUPER TUMBLE STIR DOWELS - 1.98mm DIAMETER, 4.80mm LENGTH - 1000/PKG

vp-scientific

VP 711D-3

VP 711D TUMBLE STIR DOWELS - NOT DEBURRED, FOR MACERATING TISSUE, 1000/PKG

vp-scientific

VP 712

TUMBLE STIR BARS - 1.57mm x 1.91mm x 2.90mm LONG - 1000/PKG

vp-scientific

VP 712-1

PARYLENE COATED VP 712 TUMBLE STIR BARS- 1.67mm x 2.01mm x 3.00mm LONG - 1000/PKG

vp-scientific

VP 712-2

PTFE COATED VP 712 TUMBLE STIR BARS - 3.57mm x 3.70mm x 4.85mm LONG - 100/PKG

vp-scientific

VP 712-3

VP 712 TUMBLE STIR BARS - NOT DEBURRED, FOR MACERATING TISSUE -1000/PKG

vp-scientific

VP 712A-1S

DROP DISPENSER - 96 HOLES FOR VP 712 STIR BARS

vp-scientific

VP 712B

AUTOCLAVEABLE FLIP DISPENSER - 96 HOLES FOR VP 712 STIR BARS

vp-scientific

VP 712D

SUPER TUMBLE STIR DOWELS - 1.93mm DIAMETER, 2.46mm LENGTH - 1000/PKG

vp-scientific

VP 716

TUMBLE STIR DOWELS - 1.27mm DIAMETER, 1.52mm LENGTH - 1000/PKG

vp-scientific

VP 716-1

PARYLENE COATED VP 716 - TUMBLE STIR DOWELS - DIAMETER 1.32mm, LENGTH 1.57mm - 1,000/PKG

vp-scientific

VP 716A

DROP DISPENSER - 96 HOLES FOR VP 716 STIR DOWELS

vp-scientific

VP 716B

AUTOCLAVEABLE FLIP DISPENSER - 96 HOLES FOR VP 716 STIR DOWELS

vp-scientific

VP 716D

384 AUTOCLAVEABLE DROP DISPENSER FOR VP 716 STIR DOWELS 1.27mm DIAMETER, AND 1.52mm LONG

vp-scientific

VP 717

TUMBLE STIR DOWELS - DIAMETER .457mm, LENGTH .1.20mm - 1000/PKG

vp-scientific

VP 717-1

PARYLENE COATED VP 717 TUMBLE STIR DOWELS - DIAMETER .52mm, LENGTH 1.26mm - 1000/PKG

vp-scientific

VP 718

NASA TUMBLE STIR DOWELS - 0.0762 mm DIAMETER, 1mm LENGTH - 1000/PKG

vp-scientific

VP 718-D

TUMBLE STIR DOWELS - 0.0762 mm DIAMETER, 3mm LENGTH - 1000/PKG

vp-scientific

VP 718-E

TUMBLE STIR DOWELS - 0.1524 mm DIAMETER, 3mm LENGTH - 1000/PKG

vp-scientific

VP 718-F

TUMBLE STIR DOWELS - 0.2032 mm DIAMETER, 3mm LENGTH - 1000/PKG

vp-scientific

VP 718-G

TUMBLE STIR DOWELS - 0.2540 mm DIAMETER, 3mm LENGTH - 1000/PKG

vp-scientific

VP 719A

DROP DISPENSER - 48 HOLES FOR VP 719F AND VP 719F-1 STIR DISKS

vp-scientific

VP 719F

SUPER TUMBLE STIR DISCS - 7.95mm DIAMETER, 0.635mm THICK - 1000/PKG

vp-scientific

VP 719F-1

PARYLENE COATED VP 719F SUPER TUMBLE STIR DISCS - 8.00mm DIAMETER, 0.685mm THICK - 1000/PKG

vp-scientific

VP 719F-2

PTFE ENCAPSULATED VP 719F SUPER TUMBLE STIR DISCS - 9.46mm DIAMETER, 1.45mm THICK - 100/PKG

vp-scientific

VP 720

TUMBLE STIR DISCS - 9.53mm DIAMETER, 0.51mm THICK - 1000/PKG

vp-scientific

VP 720A

DROP DISPENSER - 24 HOLES FOR VP 720 STIR DISCS

vp-scientific

VP 720B

AUTOCLAVEABLE DROP DISPENSER - 48 HOLES FOR VP 720 STIR DISCS

vp-scientific

VP 720C

AUTOCLAVEABLE FLIP DISPENSER - 24 HOLES FOR VP 720

vp-scientific

VP 720D

AUTOCLAVEABLE FLIP DISPENSER - 48 HOLES FOR VP 720

vp-scientific

VP 720F

SUPER TUMBLE STIR DISCS - 9.53mm DIAMETER, 0.635mm THICK - 1000/PKG

vp-scientific

VP 720F-1

PARYLENE COATED VP 720F SUPER TUMBLE STIR DISCS - 9.58mm DIAMETER, 0.68mm THICK - 1000/PKG

vp-scientific

VP 721A-48S

DROP DISPENSER - 48 HOLES (ON 13.0 MM CENTERS) FOR VP 721F AND VP 721F-1 STIR DISCS, STAINLESS STEEL PLENUM DOES NOT MOVE AND HAS TRIGGER RELEASE MECHANISM, STEEL PLENUM HOLE DIAMETER = 5.7 MM

vp-scientific

VP 721A-48SD

Drop Dispenser - 48 Holes (On 13.0mm Centers) For VP 721F And VP 721F-1 Stir Discs, Stainless Steel Plenum Does Not Move And Has Trigger Release Mechanism, Steel Plenum Hole Diameter = 0.225", Collar Shortened To 1/16, With 6 Locating Thumb Screws For Dee

vp-scientific

VP 721A-4S

DROP DISPENSER - 96 HOLES FOR VP 721F AND VP 721F-1 STIR DISCS - IMPROVED DESIGN

vp-scientific

VP 721B

AUTOCLAVEABLE FLIP DISPENSER - 96 HOLES FOR VP 721F AND VP 721F-1 STIR DISCS

vp-scientific

VP 721D

AUTOCLAVEABLE DROP DISPENSER FOR VP 721F, VP 721F-1 AND VP 722-1 STIR DISCS INTO 96 WELL MICROPLATES

vp-scientific

VP 721F

SUPER TUMBLE STIR DISCS - 5.08mm DIAMETER, 0.61mm THICK - 1000/PKG

vp-scientific

VP 721F-1

PARYLENE COATED VP 721F SUPER TUMBLE STIR DISCS - 5.13mm DIAMETER, 0.68mm THICK - 1000/PKG

vp-scientific

VP 722A

DROP DISPENSER - 96 HOLES FOR VP 722F AND VP 722F-1 STIR DISCS

vp-scientific

VP 722B

AUTOCLAVEABLE FLIP DISPENSER - 96 HOLES FOR VP 722F AND VP 722F-1 STIR DISCS

vp-scientific

VP 722F

TUMBLE STIR DISCS - 3.35mm DIAMETER, 0.61mm THICK - 1000/PKG

vp-scientific

VP 722F-1

PARYLENE COATED VP 722F SUPER TUMBLE STIR DISCS - 3.46mm DIAMETER, 0.68mm THICK - 1000/PKG

vp-scientific

VP 722F-2B

AUTOCLAVEABLE FLIP DISPENSER - 96 HOLES FOR VP 722F-2 PTFE STIR DISCS

vp-scientific

VP 722F-2D

AUTOCLAVEABLE 96 DROP DISPENSER FOR VP 722F-2 PTFE ENCAPSULATED STAINLESS STEEL STIR DISCS INTO 96 WELL MICROPLATES

vp-scientific

VP 724A

DROP DISPENSER - 384 HOLES FOR VP 724 STIR DISCS

vp-scientific

VP 724B

AUTOCLAVEABLE FLIP DISPENSER - 384 HOLES FOR VP 724

vp-scientific

VP 724D-1

AUTOCLAVEABLE 384 DROP DISPENSER FOR VP 724F AND VP 724F-1 STIR DISCS INTO 384 WELL MICROPLATES

vp-scientific

VP 724F

TUMBLE STIR DISCS - 1.78mm DIAMETER, 0.635mm THICK - 1000/PKG

vp-scientific

VP 724F-1

PARYLENE COATED VP 721F SUPER TUMBLE STIR DISCS - 1.87mm DIAMETER, 0.68mm THICK - 1000/PKG

vp-scientific

VP 725

LEVITATION STIR BALLS - 2.38mm DIAMETER FOR 384 WELL PLATES - 1000/PKG

vp-scientific

VP 725-1

PARYLENE COATED VP 725 LEVITATION STIR BALLS - 2.47mm DIAMETER FOR 384 WELL PLATES - 1000/PKG

vp-scientific

VP 725-1-40

PARYLENE COATED VP 725 LEVITATION STIR BALLS - 2.47mm DIAMETER FOR 384 WELL PLATES - 40,000/BTL

vp-scientific

VP 725-1S

STERILE PARYLENE COATED VP 725 LEVITATION STIR BALLS - 2.47mm DIAMETER FOR 384 DEEP WELL PLATES - 1000/PKG

vp-scientific

VP 725-1S-40

STERILE PARYLENE COATED VP 725 LEVITATION STIR BALLS - 2.47mm DIAMETER- 40,000/BTL

vp-scientific

VP 725-1S-5

STERILE PARYLENE COATED VP 725 LEVITATION STIR BALLS - 2.47mm DIAMETER, 5,000/BOTTLE

vp-scientific

VP 725-1S-9

STERILE PARYLENE COATED STAINLESS STEEL STIR BALLS - 2.47mm DIAMETER - 9000/BTL

vp-scientific

VP 72

DROP DISPENSER - 384 HOLES - LOADS 2.38mm DIAMETER BALLS FOR VP 725, VP 725S, VP 725-1 AND VP725-1S INTO DEEP WELL 384 MICROPLATES

vp-scientific

VP 72-1-96S

DROP DISPENSER - 96 HOLES - LOADS 2.38mm DIAMETER BALLS FOR VP 725, VP 725S, VP 725-1 AND VP 725-1S INTO DEEP WELL 96 MICROPLATES - NEW DESIGN TOP PLATE FIXED AND BOTTOM PLATE MOVES

vp-scientific

VP 72-1-96SC

Alignment collar for VP 72-1-96S Dispenser. Registers to a 96-vial Symyx Block (SBS footprint) with 8mm OD x 40mm height glass vials.

vp-scientific

VP 725B

AUTOCLAVEABLE FLIP DISPENSER - LOADS 384 DEEP WELL MICROPLATES - 2.38mm DIAMETER BALLS LOAD INTO ARRAY OF 16 x 24 ON 4.5mm CENTERS

vp-scientific

VP 725B-96

AUTOCLAVEABLE FLIP DISPENSER - LOADS 96 WELL MICROPLATES - 2.38mm DIAMETER BALLS LOAD INTO ARRAY OF 8 x 12 ON 9mm CENTERS

vp-scientific

VP 725C

AUTOMATIC DISPENSER THAT LOADS VP 725, VP 725S, VP 725-1 AND VP 725-1S STAINLESS STEEL BALLS

vp-scientific

VP 725C-96

AUTOCLAVEABLE HIGH VOLUME SEMI-AUTOMATIC DROP DISPENSER THAT LOADS VP 725, VP 725S, VP 725-1 AND VP 725-1S balls INTO 96 DEEP WELL MICROPLATES

vp-scientific

VP 725D

AUTOCLAVEABLE DROP DISPENSER - LOADS VP 725, VP 725S, VP 725-1 AND VP 725-1S STAINLESS STEEL BALLS INTO 384 DEEP WELL MICROPLATES

vp-scientific

VP 725E

LEVITATION STIR BALLS - 3.97mm DIAMETER FOR 96 ROUND WELL PLATES - 1000/PKG

vp-scientific

VP 725E-1

PARYLENE COATED VP 725E LEVITATION STIR BALLS - 4.06mm DIAMETER FOR 96 ROUND WELL PLATES - 1000/PKG

vp-scientific

VP 725E-1S

STERILE PARYLENE COATED VP 725E LEVITATION STIR BALLS - 4.06mm DIAMETER FOR 96 ROUND WELL PLATES - 10,000/BOTTLE

vp-scientific

VP 725EA

DROP DISPENSER - FOR 3.97mm DIAMETER STIR BALLS - 96 WELL FORMAT LOADS VP 725E, VP 725ES, VP 725E-1, AND VP 725E-1S STAINLESS STEEL BALLS FOR 96 DEEP WELL MICROPLATES

vp-scientific

VP 725EA-48-1

DROP DISPENSER - 48 HOLES - LOADS TWO 3.97mm DIAMETER BALLS, 1S VP 725E, VP 725ES, VP 725E-1 AND VP 725E-1S INTO 48 WELL MICROPLATES

vp-scientific

VP 725EB

AUTOCLAVEABLE FLIP DISPENSER - FOR 3.97mm DIAMETER STIR BALLS - 96 WELL FORMAT - LOADS VP 725E, VP 725ES, VP 725E-1 AND VP 725E-1S STAINLESS STEEL BALLS FOR 96 DEEP WELL MICROPLATES

vp-scientific

VP 725EC

AUTOMATIC DISPENSER - THAT LOADS VP 725E, VP 725ES, VP 725E-1, AND VP 725E-1S STAINLESS STEEL BALLS

vp-scientific

VP 725ES

STERILE LEVITATION VP 725E STIR BALLS - 3.97mm DIAMETER FOR 96 ROUND WELL PLATES - 10,000/BOTTLE

vp-scientific

VP 725F

LEVITATION STIR BALLS - 4.76mm DIAMETER FOR SQUARE 96 WELL PLATES - 1000/PKG

vp-scientific

VP 725F-1

PARYLENE COATED LEVITATION STIR BALLS - 4.85mm DIAMETER FOR SQUARE 96 WELL PLATES - 1000/PKG

vp-scientific

VP 725F-1-1S

Sterile Parylene Coated Levitation Stir Balls, 4.85mm Diameter For Square 96 Well Plates, 1,000/Bottle

vp-scientific

VP 725F-1S

STERILE PARYLENE COATED LEVITATION STIR BALLS - 4.85mm DIAMETER FOR SQUARE 96 WELL PLATES - 10,000/BOTTLE

vp-scientific

VP 725FA

DROP DISPENSER - THAT LOADS VP 725F, VP 725FS, VP 725F-1 AND VP 725F-1S STAINLESS STEEL BALLS FOR 96 DEEP WELL MICROPLATES

vp-scientific

VP 725FB

AUTOCLAVEABLE FLIP DISPENSER - THAT LOADS VP 725F, VP 725FS, VP 725F-1, AND VP 725F-1S STAINLESS STEEL BALLS FOR 96 DEEP WELL MICROPLATES

vp-scientific

VP 725FB-48DW

-

vp-scientific

VP 725FC

AUTOMATIC DISPENSER - THAT LOADS VP 725F, VP 725FS, VP 725F-1, AND VP 725F-1S STAINLESS STEEL BALLS

vp-scientific

VP 725FD

AUTOCLAVEABLE DROP DISPENSER - THAT LOADS ALL VP 725E SERIES AND VP 725F SERIES STEEL BALLS FOR 96 DEEP WELL MICROPLATES, EACH

vp-scientific

VP 725FS

STERILE LEVITATION STIR BALLS - 4.76mm DIAMETER FOR SQUARE 96 WELL PLATES - 10,000/BOTTLE

vp-scientific

VP 725G

LEVITATION STIR BALLS - 5.56mm DIAMETER FOR SQUARE 96 WELL PLATES - 1000/PKG

vp-scientific

VP 725G-2

LEVITATION STIR BALLS PTFE DIPPED - 5.57mm DIAMETER FOR SQUARE 96 WELL PLATES - 100/PKG

vp-scientific

VP 725PS

Stir Ball, 12mm diameter sphere, PTFE Encapsulated 6mm long x 6mm diameter cylinder Alnico Magnet, 5.5MGO, 10/pkg

vp-scientific

VP 725RS

RECYCLED STERILE LEVITATION STIR BALLS - 2.38mm DIAMETER FOR 384 DEEP WELL PLATES - 50,000/BOTTLE

vp-scientific

VP 725S

STERILE LEVITATION STIR BALLS - 2.38mm DIAMETER FOR 384 DEEP WELL PLATES - 10,000/BOTTLE

vp-scientific

VP 725ZB-4

Arabadopsis Seed Loader designed to dispense one seed, approximay 0.5 mm long by 0.3 mm wide, into each well of a 96 well microplate.

vp-scientific

VP 725ZB-4A

Insert accessory to accommodate the Nunc microplate #278012 that was used in Dr. Patrick Krysan’s “A High-Throughput Method for Capturing Plant Tissue Samples for Genotype Analysis” experiment.

vp-scientific

VP 730

HUMIDITY CHAMBER - FOR MAGNETIC STIRRER

vp-scientific

VP 730A

WATER RESERVOIR/TRAY - FOR ALLIGATOR TUMBLE STIRRER

vp-scientific

VP 731

TUMBLE POWDER - 0.7 MICRON PARTICLES - 10g IN AN AQUEOUS SLURRY

vp-scientific

VP 733

STAINLESS STEEL STIR STIX - 1.58mm DIAMETER, 31.8mm LONG - 100/PKG

vp-scientific

VP 733-2

PTFE ENCAPSULATED S/S TUBE - 2.5 +/- .05mm DIAMETER , 34.6mm +/- .2mm LONG - 100/PKG

vp-scientific

VP 733-2A

AUTOCLAVEABLE DROP DISPENSER THAT LOADS VP 733-2, VP 734-2 AND VP 735-2 PTFE COATED STIR STIXS INTO 96 DEEP WELL MICROPLATES

vp-scientific

VP 733-2A-1

ALIGNMENT COLLAR FOR 96 TUBE RACKS

vp-scientific

VP 733-2B

AUTOCLAVEABLE FLIP DISPENSER THAT LOADS VP 733-2, VP 734-2 AND VP 735-2 PTFE COATED STIR STIXS INTO 96 DEEP WELL MICROPLATES

vp-scientific

VP 733-3A

AUTOCLAVEABLE DROP DISPENSER THAT LOADS VP 733-2, VP 734-2 AND VP 735-2 PTFE COATED STIR STIXS INTO 48 TEST TUBES (12 mm DIAMETER, 75 mm LONG ON 14 mm CENTERS)

vp-scientific

VP 734

STAINLESS STEEL STIR STIX - 1.58mm DIAMETER, 25.4mm LONG - 100/PKG

vp-scientific

VP 734-2

PTFE ENCAPSULATED STIR STIX - 2.5 +/- .05mm DIAMETER, 28.2mm +/- .2mm LONG - 100/PKG

vp-scientific

VP 735

STAINLESS STEEL STIR STIX - 1.58mm DIAMETER, 19mm LONG - 100/PKG

vp-scientific

VP 735-2

PTFE ENCAPSULATED S/S TUBE DIAMETER = 2.5 +/- .05mm, LENGTH = 21.8mm +/- .2mm, 100/PKG

vp-scientific

VP 736

STAINLESS STEEL STIR STIX - 0.787mm DIAMETER, 12.7mm LONG - 100/PKG

vp-scientific

VP 736-1

PARYLENE COATED VP 736 STIR STIXS 0.89 mm DIAMETER AND 12.80 mm LONG, 100/ PKG

vp-scientific

VP 736-384A

AUTOCLAVEABLE DROP DISPENSER THAT LOADS VP 736 AND VP 736-1 (.787mm DIAMETER AND 12.5mm LONG) AND VP 736-1 (0.89mm DIAMETER AND 12.8mm LONG) STIR STIXS INTO 384 WELL MICROPLATES, INCLUDES VP 771 MAGNET, SIMILAR TO VP 736A BUT MADE FOR 384 WELL SBS PLATE

vp-scientific

VP 736A

AUTOCLAVEABLE DROP DISPENSER THAT LOADS VP 736 AND VP 736-1 STIR STIXS INTO 96 PCR MICROPLATES, INCLUDES VP 771

vp-scientific

VP 737

STAINLESS STEEL STIR STIX - 0.787mm DIAMETER, 7.6mm LONG - 1000/PKG

vp-scientific

VP 737-1

STAINLESS STEEL STIR STIX - 0.89mm DIAMETER, 7.8mm LONG - 1000/PKG

vp-scientific

VP 737A

-

vp-scientific

VP 740

STIR STIX UNLOADER WITH CATCH BASIN

vp-scientific

VP 740B

COLLAR FOR ALIGNING MICRONIC BLOCKS TO VP 540A2 AND VP 540AC

vp-scientific

VP 740C

ADAPTOR TO HOLD VP 540DB ON THE STIR STIX CATCH BASIN HOLDER

vp-scientific

VP 741-I

BOTTOM, SIDE AND END HEAT CONDUCTING ALUMINUM SPACERS FOR VP 741 AND VP 743 HEATING BLOCK TO FIT ABGENE'S #AB 0661 DEEP WELL MICROPLATE

vp-scientific

VP 741ABW-R-MA

Heating Block, deep chamber for microplates or racks of tubes or vials, special design to minimize Eddy currents, Watlow PID controller, temperature range 25 to 200C, 120V, 19mm Mica SBS adaptor on bottom.

vp-scientific

VP 741ABW-R-MB

Heating Block, deep chamber for microplates or racks of tubes or vials, special design to minimize Eddy currents, Watlow PID controller, temperature range 25 to 200C, 120V, 12.5mm Mica SBS adaptor on bottom.

vp-scientific

VP 741ABW-RCE-MA

Heating Block, deep chamber for microplates or racks of tubes or vials, special design to minimize Eddy currents, Watlow PID controller, temperature range 25 to 200C, 230V, 19mm Mica SBS adaptor on bottom.

vp-scientific

VP 741ABW-RCE-MB

Heating Block, deep chamber for microplates or racks of tubes or vials, special design to minimize Eddy currents, Watlow PID controller, temperature range 25 to 200C, 230V, 12.5mm Mica SBS adaptor on bottom.

vp-scientific

VP 741AJ

Insulating jacket for VP 741A Heat Blocks, polycarbonate, with SBS-dimensioned accepting pocket on inside bottom to locate heat block via attached SBS MICA adaptor.

vp-scientific

VP 741AW-R-MA

Heating Block, deep chamber for microplates or racks of tubes or vials, Watlow PID controller, temperature range 25 to 200C, 120V, 19mm Mica SBS adaptor on bottom.

vp-scientific

VP 741AW-R-MB

Heating Block, deep chamber for microplates or racks of tubes or vials, Watlow PID controller, temperature range 25 to 200C, 120V, 12.5mm Mica SBS adaptor on bottom.

vp-scientific

VP 741AW-RCE-MA

Heating Block, deep chamber for microplates or racks of tubes or vials, Watlow PID controller, temperature range 25 to 200C, 230V, 19mm Mica SBS adaptor on bottom.

vp-scientific

VP 741AW-RCE-MB

Heating Block, deep chamber for microplates or racks of tubes or vials, Watlow PID controller, temperature range 25 to 200C, 230V, 12.5mm Mica SBS adaptor on bottom.

vp-scientific

VP 741BBW-R-MA

Heating Block, shallow chamber for microplates or racks of tubes or vials, special design to minimize Eddy currents, Watlow PID controller, temperature range 25 to 200C, 120V, 19mm Mica SBS adaptor on bottom.

vp-scientific

VP 741BBW-R-MB

Heating Block, shallow chamber for microplates or racks of tubes or vials, special design to minimize Eddy currents, Watlow PID controller, temperature range 25 to 200C, 120V, 12.5mm Mica SBS adaptor on bottom.

vp-scientific

VP 741BBW-RCE-MA

Heating Block, shallow chamber for microplates or racks of tubes or vials, special design to minimize Eddy currents, Watlow PID controller, temperature range 25 to 200C, 230V, 19mm Mica SBS adaptor on bottom.

vp-scientific

VP 741BBW-RCE-MB

Heating Block, shallow chamber for microplates or racks of tubes or vials, special design to minimize Eddy currents, Watlow PID controller, temperature range 25 to 200C, 230V, 12.5mm Mica SBS adaptor on bottom.

vp-scientific

VP 741BW-R-MA

Heating Block, shallow chamber for microplates or racks of tubes or vials, Watlow PID controller, temperature range 25 to 200C, 120V, 19mm Mica SBS adaptor on bottom.

vp-scientific

VP 741BW-R-MB

Heating Block, shallow chamber for microplates or racks of tubes or vials, Watlow PID controller, temperature range 25 to 200C, 120V, 12.5mm Mica SBS adaptor on bottom.

vp-scientific

VP 741BW-RCE-MA

Heating Block, shallow chamber for microplates or racks of tubes or vials, Watlow PID controller, temperature range 25 to 200C, 230V, 19mm Mica SBS adaptor on bottom.

vp-scientific

VP 741BW-RCE-MB

Heating Block, shallow chamber for microplates or racks of tubes or vials, Watlow PID controller, temperature range 25 to 200C, 230V, 12.5mm Mica SBS adaptor on bottom.

vp-scientific

VP 741GZ-64

Heat Block, 64 positions for 50ml conical tubes, graphite for combination heating and stirring, Watlow PID controller, temperature range 25 to 125C, 120V.

vp-scientific

VP 741GZ-64CE

Heat Block, 64 positions for 50ml conical tubes, graphite for combination heating and stirring, Watlow PID controller, temperature range 25 to 125C, 220V.

vp-scientific

VP 741I6A

96 PCR PLATE HEATING BLOCK/REGISTRATION BLOCK, SBS FOOT PRINT TAPERED HOLES

vp-scientific

VP 741I6B

CUSTOM ALUMINUM HEAT TRANSFER BASE FOR ABGENE (#AB093) 96 DEEP WELL MICROPLATE, SBS FOOTPRINT, SCULPTED TO CLOSELY FOLLOW THE OUTSIDE CONTOURS OF THE PLATE BOTTOM. CAN BE USED ON VP 741BW-R OR ON COMMERCIALLY AVAILABLE DRY BATH HEATING UNITS

vp-scientific

VP 741I6C

Aluminum Heat Transfer Plate For Abgene (#AB 0661) Or Other Deep Well Microplate, SBS Footprint, Sculpted To Closely Follow The Outside Contours Of The Plate Bottom, For Use With VP 741, VP 741A-R And VP 743 Deep Well

vp-scientific

VP 743AW-R-MB-1

Aluminum Heating Block for three deep well microplates or racks of glass vials, temperature control 25 to 200° C with RTD, Watlow Controller, 120 Volt, Mica insulation on bottom for VP 710E-2HM Magnetic Tumble Stirrer.

vp-scientific

VP 743AW-R-MB-1CE

Aluminum Heating Block for three deep well microplates or racks of glass vials, temperature control 25 to 200° C with RTD, Watlow Controller, 230 Volt, CE compliant, Mica insulation on bottom for VP 710E-2HM Magnetic Tumble Stirrer.

vp-scientific

VP 744

Heater/Chiller Recirculating Fluid Block with SBS locating feature on the bottom.

vp-scientific

VP 744A

Heater/Chiller Recirculating Fluid Block with SBS locating feature on the bottom and SBS microplate accepting pocket on the faceplate.

vp-scientific

VP 744B-MB

Heater/Chiller Recirculating Fluid Block for deep well or standard microplates. Special design to minimize eddy currents when used on a Tumble Stirrer.

vp-scientific

VP 745

HEATER/CHILLER RECIRCULATING FLUID BLOCK FOR VP 750 BUBBLE PADDLE STIRRER

vp-scientific

VP 749-9-32-105

-

vp-scientific

VP 750

POLYPROPYLENE BUBBLE PADDLE RESERVOIR; INCLUDES 4 PARYLENE COATED STAINLESS STEEL BUBBLE PADDLES WITH 13 BUBBLES FOR 96 PIPETTES

vp-scientific

VP 750-13-AL

ANODIZED ALUMINUM BUBBLE PADDLE RESERVOIR; INCLUDES 1 PARYLENE COATED STAINLESS STEEL BUBBLE PADDLE WITH 13 BUBBLES AND 2 PTFE HUBS; MIXES 70ml

vp-scientific

VP 750-13-PP

Bubble Paddle Reservoir, 12-channel format, polypropylene, stirred by Tumble Stirrer, includes 1 stainless steel bubble paddle with 13 bubbles and 2 PTFE hubs, mixes 70 ml.

vp-scientific

VP 750-13-PTFE

PTFE BUBBLE PADDLE RESERVOIR, 12-CHANNEL FORMAT; INCLUDES 1 STAINLESS STEEL BUBBLE PADDLE WITH 13 BUBBLES AND 2 PTFE HUBS; MIXES 70ml

vp-scientific

VP 750-ECON-6

ECONOMY BUBBLE PADDLE RESERVOIR MADE WITH A DISPOSABLE NALGENE RESERVOIR (VP 792D) AND FOUR 11 BUBBLE PADDLES (VP 757FE-1) IN A POLYCARBONATE FRAME CONTAINING PTFE BEARINGS.

vp-scientific

VP 750-ECON-6A

Economy Bubble Paddle Reservoir made with Nalgene disposable polypropylene. SBS footprint with 6 bubble paddles (7 bubbles/paddle) and polycarbonate frame with PTFE bearings for the bubble paddles.

vp-scientific

VP 750ACFeP

BUBBLE PADDLE, 13 BUBBLES ON 9mm CENTERS, CONSTRUCTED FROM PASSIVATED STAINLESS STEEL AND COATED WITH PARYLENE, MAGNETIC CLUTCH AND PTFE HUB

vp-scientific

VP 750AFeP

BUBBLE PADDLE, 13 BUBBLES ON 9mm CENTERS, CONSTRUCTED FROM PASSIVATED STAINLESS STEEL AND COATED WITH PARYLENE WITH 2 PTFE HUBS

vp-scientific

VP 750AL

Aluminum Bubble Paddle Reservoir For 96 Pipettes - Includes 4 VP 757AFe Bubble Paddles. Reservoir Has SBS Dimensions And A Peltier Adaptor Feature On The Bottom

vp-scientific

VP 750AL-2

Hydrophilic-Coated Aluminum Reservoir. 127.7mm long, 85.5mm wide, 50mm tall. Flat Bottom, designed to hold VP 750P-ECON-5F Polycarbonate Frame with four VP 757AFe Bubble Paddles

vp-scientific

VP 750D

DELRIN MAGNETIC BUBBLE PADDLE RESERVOIR FOR 96 PIPETTOR, INCLUDES 4 PARYLENE COATED STAINLESS STEEL BUBBLE PADDLES

vp-scientific

VP 750D-SBS

DELRIN BUBBLE PADDLE RESERVOIR - INCLUDING 4 BUBBLE PADDLES WITH 13 BUBBLES FOR 96 PIPETTES WITH SBS FEATURE ON THE BOTTOM

vp-scientific

VP 750PTFE

PTFE BUBBLE PADDLE RESERVOIR - INCLUDING 4 BUBBLE PADDLES WITH 13 BUBBLES FOR 96 PIPETTES

vp-scientific

VP 750PTFE-SBS

PTFE BUBBLE PADDLE RESERVOIR - INCLUDING 4 BUBBLE PADDLES WITH 13 BUBBLES FOR 96 PIPETTES WITH SBS FEATURE ON THE BOTTOM

vp-scientific

VP 751AFe

BUBBLE PADDLE, 7 BUBBLES ON 9 mm CENTERS, CONSTRUCTED FROM PASSIVATED STAINLESS STEEL WITH 2 PTFE HUBS

vp-scientific

VP 754CFe

BUBBLE PADDLE, 17 BUBBLES ON 4.5mm CENTERS, CONSTRUCTED FROM PASSIVATED STAINLESS STEEL, MAGNETIC CLUTCH

vp-scientific

VP 754CMP

MINIATURE POLYPROPYLENE RESERVOIR WITH DUCTED BOTTOM FOR 16 PIPETTES INCLUDING STAINLESS STEEL PADDLE WITH 17 BUBBLES AND MAGNETIC CLUTCH, WITH INLET AND OUTLET NIPPLES, MIXES 13ml

vp-scientific

VP 754V-50

Vertical Bubble Paddle stirrer to stir magnetic beads and keep them in suspension in a 50ml tube.

vp-scientific

VP 75CAL

BUBBLE PADDLE, 25 BUBBLES ON 4.5mm CENTERS, CONSTRUCTED FROM ANODIZED ALUMINUM, MAGNETIC CLUTCH AND PTFE HUB

vp-scientific

VP 75CFe

Bubble Paddle, 25 Bubbles On 4.5mm Centers, Constructed From Passivated Stainless Steel, Magnetic Clutch And PTFE Hub

vp-scientific

VP 75CFeP

BUBBLE PADDLE, 25 BUBBLES ON 4.5mm CENTERS, CONSTRUCTED FROM PASSIVATED STAINLESS STEEL AND COATED WITH PARYLENE, MAGNETIC CLUTCH AND PTFE HUB

vp-scientific

VP 75Fe-1

Economy Bubble Paddle for disposable SBS polypropylene reservoir (VP 578DC), 8 bubble paddles with PTFE bearings for the bubble paddles.

vp-scientific

VP 75FeP

BUBBLE PADDLE, 25 BUBBLES ON 4.5mm CENTERS, CONSTRUCTED FROM PASSIVATED STAINLESS STEEL AND COATED WITH PARYLENE WITH 2 PTFE HUBS

vp-scientific

VP 75L

ANODIZED ALUMINUM 8 MAGNETIC CLUTCH BUBBLE PADDLE RESERVOIR FOR 16 ROWS OF 24 PIPETTES, WITH DUCTED BOTTOMS TO CONFORM TO 8, PADDLES WITH 25 BUBBLE PADDLES EACH

vp-scientific

VP 755C-384C

Delrin Reservoir With 8 Magnetic Clutch Bubble Paddles For 16 Rows Of 24 Pipettes, With Ducted Bottoms To Conform To 8 Paddles With 25 Bubbles Each, Inlet And Outlets With Screw Adjustable Overflow Weir And Aluminum Base For Strength And Heat Exchange

vp-scientific

VP 755D

DELRIN BUBBLE PADDLE RESERVOIR INCLUDING 8 BUBBLE PADDLES WITH 25 BUBBLES FOR 384 PIPETTES

vp-scientific

VP 755D-1

DELRIN BUBBLE PADDLE RESERVOIR INCLUDING 8 BUBBLE PADDLES WITH 25 BUBBLES FOR 384 PIPETTES, SBS FEATURE MACHINED INTO BASE

vp-scientific

VP 756

POLYPROPYLENE BUBBLE PADDLE RESERVOIR INCLUDING 1 PARYLENE COATED STAINLESS STEEL BUBBLE PADDLE WITH 9 BUBBLES WITH 2 PTFE HUBS, MIXES 25ml

vp-scientific

VP 756A

POLYPROPYLENE BUBBLE PADDLE RESERVOIR; INCLUDES 1 PARYLENE COATED STAINLESS STEEL BUBBLE PADDLE WITH 9 BUBBLES AND 2 PTFE HUBS; MIXES 50ml

vp-scientific

VP 756A-2

DELRIN BUBBLE PADDLE RESERVOIR INCLUDING 2 PARYLENE COATED STAINLESS STEEL BUBBLE PADDLE WITH 9 BUBBLES WITH 4 PTFE HUBS, MIXES 75 ml

vp-scientific

VP 756A-LID

Polypropylene lid for the VP 756A, slotted to allow for pipette tips to access reservoir.

vp-scientific

VP 756ACAL

BUBBLE PADDLE, 9 BUBBLES ON 9mm CENTERS, CONSTRUCTED FROM ANODIZED ALUMINUM, MAGNETIC CLUTCH AND PTFE HUB

vp-scientific